Quote:
Originally Posted by 4everkidd
Scope out YouTube; swapping a caliper is a very easy DIY.
I would highly suggest a motive power bleeder to make the job even easier.
|
that's the pressure bleeder I used...
also before you unhook the calipers from the brake lines depress the brake pedal and leave half way depressed in - that blocks the fluid from leaking out and you will get no leaks and no chance on air entering your lines and with that being said a lot easier job when it comes to bleeding them later after installation of new calipers...
also when comes to bedding the new brake pads - this is what porterfield sends out.. they pretty much say that pads are pre bedded and you suppose to drive easy without bedding in procedures, no hard breaking unless you have to for around 100 miles...