[NYBulldog]

So out of frustration I pressed the driver side socket really hard into the plug and boom the driver seat started working. Incredible. Checked and there was a slightly loose pin in the socket causing false contact.

I checked my passenger side socket that was not equipped with memory and pin 5 and 6 were not there. I made the mistake of hooking into similar brown/yellow and red/yellow wires... they look identical. took my jump wiring out of the socket and directly to the seat socket where 5 and 6 would be and bang we are good to go.

I have a permanent Code of C95409 Message Missing (Seat Memory) Advanced Crash Safety Module Receiver Driver's Seat Module Transmitter. NEED HELP with this one. My guess is the car can't do its memory seat readjustment since the module doesn't have it programmed for my car. I can't use my old seat module because they are different. I will try coding: Sitzpositionsensor_Fahrer (Driver seat position sensor)
Sitzpositionsensorserkennung_Sitzmemory_Fahrer (Driver seat position sensor memory)

I also have 930B1F Seat - Position Sensor Passenger Line Open Circuit. I have a feeling its because I didn't use 22awg wiring, I will swap it out on Monday.