Quote:
Originally Posted by kyledo123
Hi PlayTookies,
The whole retrofitting process is pretty simple if you know what to do.
For me it took around 2 weeks as I was clueless, but in reality it should only take a couple hours.
Below is a list of parts I used.
32306859265 - Touch sensor module
32307851355 - Steering wheel wiring harness for Touch sensor module
32307851513 - M sports steering wheel leather without heat as my car didn't come with heat.
61317847654 - Switch, MF steering wheel, M-Sport (You do not need this however reighngold complains about the old switch unit)
After installing all the hardware you need to VO code BDC_Body, KAFAS2 and KOMBI and run a calculated test plan in reighngold in order to calibrate the new touch sensor.
Unfortunately Reighngold is required which was the only reason it took me so long.
I recommend downloading version 3.45 as the other versions gave me trouble when trying to run the calculated test plan.
|
Hi my Rheingold cannot find any fault so how I can let it go for a calculate test to calibrate the touch sensor, now once I press on the new button idrive will show TJA failure
Need help please
Thanks