Quote:
Originally Posted by sukhk527
The reason I went with the linear spring was to prevent as much shock travel given it's linear nature so let's see if the theory pans out. I don't anticipating any bottoming out on my set up , but only time will tell.
|
sukhk527 I doubt you will at that height. I went a bit, let's say enthusiastic, when I first installed my BCR coilovers. Plus I had it 3 clicks on the soft side. After one (construction zone) bad dropoff I had a bad rub so raised it 1/4" all around and went 6 clicks to the stiffer side and haven't had a problem since. Ride isn't as soft, but I'm fine with that.
Here's what mine was like at the initial low setting on the coils.
