Quote:
|
Originally Posted by avi8tir
Already have it all buttoned up so hopefully this will help a bit....
First, remove the weather stripping.... pops right off and right back on when done.
Next remove these 5 torx screws - this will allow you to pull the top of the bumper forward enough to access the top clips with a flathead screwdriver. do the top 2 first... this will release the top a bit.... then do the sides.... make sure to keep it pulled out or it will pop back in. Once the top and sides are done, you can reach behind and underneath to release the bottom 2 clips with your fingers.
Here are the clips... you need to push on the center part which will allow it to release
The replacements pop right in. put the torx screws back and pop the weather stripping back on.
 |
Bullshit!!!
Beware DIY F15 owners, there are actuall 3 CLIPS at the bottom on each side!! I almost broke the clip because I "assume" there were only 2 clips after this reply.