Quote:
Originally Posted by 9jabimmer
Yes. I have been able to both VO code, and FDL code. I must be missing something else.
|
OK, I looked again at what I wrote and I realize that my instructions were a bit sloppy.
So, let me try again:
- Confirm that the CAFD that appears in your SVT tree under your FLE ECUs is CAFD_000024C3_008_007_002 (this should be the case for vehicles with production dates through December 2015).
- If the above is the case, download the attached CAFD (which is already coded) and rename it CAFD_000024C3_008_007_002.ncd.
- Connect to the car, read and activate FA and read SVT as usual.
- Right-click on the CAFD underlying the first FLE ECU, select New > FDL and then select the downloaded CAFD.
- Expand the folder that appears under the FLE ECU, select the CAFD inside the folder and click "Code FDL".
- Repeat Steps 4 and 5 for the other FLE ECU.
Let me know if this solves your issue.
I have also edited the original post to reflect these instructions.