X5 guy - try the new link -
https://files.fm/u/ch6jtbs8tg (seems the old one has expired).
OK, so I've installed new upper locks, made proper adjustments I've made the lock bolt shorter about 0,5 cm). The mask started to close very difficult - need to slam it quite hard ( previously I was closing it with just "finger push"). Then I realized I'm getting the "open hood" error (left lock on passenger side was not jumping in the locking mechanism) and I needed to loose the tension a little bit on the adjustment screws on both locks...
Made a test drive, even though the hood is now not "clicking", the noises from first post are still here
...
Well, on saturday will be replacing the engine mounts...
PS. The steerings rods and tie rod ends + sway bar links replaced as well - nothing changed as well.