Tonight I was finally about to get to coding after receiving my cable Thursday late and then waiting out the 48 hours on the ESYS Launcher. When I started coding FDLs, I noticed many of the setting locations outlined in the guides and master spreadsheet were either not present at all, or in different locations. Also noticed some of the ECUs now have different names. Examples
The coding guides have an ECU named "HKFM". On my car it is called "HKFM2"
Coding guides have an EDU named "HU_NBT". On my car it is called "HU_NBT2"
Examples of FDL settings in different locations
In the spreadsheet guide, the setting for turning on the turnsignal in the HUD is called "HUD_TURNSIGNAL" and is said to be located in module HU_NBT, section "3001". On my car, it is located in module "HU_NBT2" in a section called "300C HUD,50".
In the spreadsheet guide, the setting for "Close trunk via keyfob" is said to be in module "HKFM" in section "3010". On my car, there is only a module "HKFM2". There is a section "3010" but no function value "SCH_FBD". In fact, all of the functions values shown are only numbers save for 2 or 3.
Given the 2017s have the new iDrive 5.0, it seems as if BMW has changed some of the coding tree/names/locations of things. Can any coding experts chime in?
spreadsheet guide
https://docs.google.com/spreadsheets...e9s4/htmlview#
F85 X5M Coding guide
http://www.bmwesys.com/guides/BMW%20...%20series.docx