Quote:
Originally Posted by McDonaldD
32306859265 - Touch sensor module ~60 euro
32307851355 - Steering wheel wiring harness for Touch sensor module ~27 euro
32307851514 - M Sport touch-enabled steering wheel w/heat ~600 euro
My brother lives in Germany so I had him ship me the parts.
I, too, decided to skip swapping out the buttons on my steering wheel - it would have been ~200 euro for the new switch cluster but I did not want to call attention to the feature.
Photos are attached but the process is pretty simple. The "touch enabled wheel" is definitely a different part, it has an additional set of wires that my m-sport w/heat did not. These wires connect to the new touch module. The new wiring harness is required for all US vehicles and is basically an extension that has the new leads for the touch module.
Not sure if all of these were entirely necessary but I VO coded BDC, KAFAS2 and KOMBI. The buttons and notifications worked at this point but the new module caused a malfunction each time I tried to activate it. I used Rheingold to clear the errors and it automatically calibrated the new touch module as part of its "calculated test plan."
Attachment 1120460
Attachment 1120457
Attachment 1120458
Attachment 1120461
Attachment 1120462
Attachment 1120467
Attachment 1120464
Attachment 1120465
|
Hi, as the I got all the parts installed but once I press the bottom it shows TJA fail so how you connect the car with Rheingold with enthernet cable or Dcan cable and what is the procedures with Rheingold?
Thanks for help