08-16-2021, 09:32 AM
|
#11
|
Drives: x5
Join Date: Feb 2017
Location: midwest
|
Quote:
Originally Posted by randrews15
I did motor mounts on a E70 X5 that I sold a few months ago. Drivers side was a breeze but requires the removal of the charge pipe for sure. The passenger side was a different story. It was an Xdrive and this requires the removal of the axle in order to access one bolt that holds the engine mount bracket in place. To get the axle out you'll need to loosen some of the lower control arms as well, and you'll need a axle puller tool to reseat the axle. I used a jack and a block of wood to lift the motor once everything was loose to move the mounts out. It's very doable as a DIY if your good and have the right tools. Plan on spending about 3 to 4 hours doing this as the passenger side requires so much work. I imagine a S drive would be easier as there isn't any front axles to deal with. You'll definitely learn new words undertaking this process. I ordered BMW mounts as I didn't know if Febi was a good replacement. I would imagine Corteco is the maker of the BMW mounts.
|
Thanks!
|
|
|