|
To set your vehicle to always start in "Sport" mode, you need to code a setting, the same setting, in Integrated Chassis Mgmt (ICM) and Body Domain Controller (BDC). In the attached screenshot from Bimmercode ICM module, I have the "Driving Mode on Startup" set to "Sport". That's the only setting in each module you need to mess with.
Steps:
- fire up Bimmercode and your vgate device
- go to ICM module
- set Driving Mode on Starup to Sport
- code ICM
- ignore errors from car
- back out of ICM and go to Body Domain (BDC) module
- open a beer while bimmercode reads all those bdc settings
- scroll down the bdc settings until you get to those same drive mode settings
- set Driving Mode on Startup to Sport
- code BDC
-ignore errors
- close out Bimmercode app, shut down car
- exit car and lock with fob, leave the car alone
- wait 15-20 minutes
- unlock car and start...all errors should be clear
-drink another beer, you're done
|