Mine rattles too and it has become worse over the last few days.
Those strikers need to be in the down position ( up is just half way to taking them off . Guess this is only for assembly)
If you take off the cap of the strikers, you can see the bolt and springs. Loosen the bolt, and you can adjust the striker. Then tighten again. I think the springs are only there to help you adjust, because once you tighten the bolt again, the striker will not move.
I tried adjusting the rubber stops, but it doesn't help either. And if the striker is adjusted too tight, the trunk will not close...(electric closing mechanism opens the lid again)
Will bring the car too the dealer next week for repairs...
|