|
=> Connect
=> Expert Mode
=> Coding
=> Read FA
=> Save FA
=> Editiors and viewers
=> FA-editor
=> Go to HO-Wort and right click on "Edit," then type "SBRE" under the HO-Wort file
=> Select the FA, right click "Enable FA" and "Calculate FA" to verify that no errors are found after adding the SBRE
=> Check the vehicle profile to locate the "" aftermarket retrofit "and check" that you see something about 19 inch sport brake, forgot what specifically it said....note there is nothing about 20 or 21 inch because the. M performance brake kit for f15 supports 19 inch and up... It's four piston front not six that comes with f85 "has been added to the file
=> Write (write) FA to your car. No confirmation window will appear after saving the FA to the car
=> Expert Mode
=> Coding
=> Read (read) the FA. You are able to see SBRE be added to the HO-Wort folder on your car.
=> Read SVT, and locate the "DSC" (File Folder SVT / ECU / DSC), then right-click the "DSC" folder and select "Code". Consolidation should start immediately.
=> Allow the coding is over, and repeat step 1 to save a copy of the new FA.
=> Disconnect the car's computer. Ready to go it's done.
|