Quote:
Originally Posted by osmansiddiqui95
As long as the fuse is not blown currently then no need to replace it again. Also, you don't have to remove the battery to change the beads but you will have to remove the 40amp fuse to stop the power to it instead, also make sure you service the solenoid valve on the compressor if you change beads since the real problem is the solenoid valve since it gets jammed. Last thing if you do service the compressor due to relay doesn't fix the issue then make sure you get the car to air out on both side bags than start the removal of the compressor.
|
Got it! How do I make the car air out on both sides of the bags? Currently it is lower than normal but not completely at lowest point if that makes sense