Quote:
Originally Posted by f15Msport
car looks great, thats the perfect stance! Can you post pic showing off the spacer setup? curious to see how flush the wheels are with the fender lines in the front and rear. I was planning on the same H&R sport springs but with 12mm front and 15mm rear spacers........help me tip the scales!
|
Please read my spacer thread. If your car is after 01/14 production, you can't use 10/12/13/15mm spacer in the front. The only one you can use is 5mm.
The 10mm is cutting it close, since there is a bevel inside the wheel where it sits on the hub. So with 10mm spacer, the wheel may not sit properly on the hub, only about 2-3mm on the hub. I don't think it will be safe enough with the weight of the car.
While the 12/13/15mm spacers, it has the hubcentric rings on it, where it won't clear the hub shoulder where it is over 15mm tall.