Quote:
Originally Posted by Almaretto
Read ECU and see if any of light modules are missing CAFD. If they are, injet one. If that fails, you must flash program.
VO code BDC Body, FLA or KAFAS, and Both LHM/TMS or FLE.
Then, use ISTA+ to initialize. |
This is my brother's car.
My actions:
1. Stretched to every 1 power wire to the headlamp from the front (to the left of Faro) and back (right headlamp) Toko-distributor
2. Changed under the Steering switch to European auto-far
3. Changed configuration: via VO Coding removed from FA 522, 524, 5a1, 8s4 Added 552, 5ac
lamp not earned
Сoding:
4. TMS units appeared and LHM, for which use the ' Detect CAF for SWE ' added for:
(41) TMS_L cafd_00001082_032_001_000 (f025-15-11-505)
(42) TMS_R cafd_00001083_032_001_000 (f025-15-11-505)
(43) LHM_L cafd_000010ba_001_008_051 (f025-17-11-520)
(44) LHM_R cafd_000016bf_001_008_051 (f025-17-11-520)
VO code: BDC_Body, KAFAS2, (41) TMS, (42) TMS, (43) LHM, (44) LHM
Earned middle, ring and turn signals do not work-
- LHM_L and LHM_R blocks the error disappeared, but the STML and STMR stayed
- Initialization using Ista+ does not pass, writes-coding error
Not initialize when performing service function error-programming interrupted with error.
When bought headlights, new seller said.
??? I can break both modules if I connected LAE headlights instead of xenon without changing the wiring and changing the FA ???
I came across such a description on one of the forums:
When you completed the manual work remember to NOT INSTALL THE LED HEADLIGHT BEFORE HAVE CODED FA (Veichle Order) AND FRM ECU.
This step is FUNDAMENTAL, because FRM send different signals to headlights depending of the configuration, if you install LED but the car and FRM is coded for xenon simply you risk to burn your thousand € or $ headlight!!!!)
http://f10.5post.com/forums/showthread.php?t=1355907
please somebody, if possible for more details where and what to fix?