Quote:
Originally Posted by -c-
Lol was going to start this thread back up.
My contact that was going to make me the harness and code it at his shop never went through, either I was away for business abs or he was away for a busy and then had to move out of Chicago.
I have the lights and all I need in the wire to swap and coding and when it's the newer headlight 2016 and newer in a 2016 and or newer x5 it's just the one wire. It's just changing how it gets power. But I am just having trouble getting confirmation as to how to or where to connect it.
That's all I need and I'm golden.
I have someone who can code but just need that one confirmation of where to tap into the fuse box and can make this happen!
|
The wiring for the 2016+ lights in a 2016+ X5 coming form adaptive xenon's should be:
Left:
-Remove yellow/green wire in port 3 on the headlight plug.
-2.5mm (14AWG) wire from port 3 on the headlight plug to Fuse 57 on the front power distribution box (20A).
Right:
-Remove yellow/blue wire in port 3 on the headlight plug.
-2.5mm (14AWG) wire from port 3 on the headlight plug to Fuse 115 on the rear fuse carrier (20A).