[MrTookies]

Originally Posted by kyledo123

Hi PlayTookies,

The whole retrofitting process is pretty simple if you know what to do.

For me it took around 2 weeks as I was clueless, but in reality it should only take a couple hours.

Below is a list of parts I used.

32306859265 - Touch sensor module
32307851355 - Steering wheel wiring harness for Touch sensor module
32307851513 - M sports steering wheel leather without heat as my car didn't come with heat.
61317847654 - Switch, MF steering wheel, M-Sport (You do not need this however reighngold complains about the old switch unit)

After installing all the hardware you need to VO code BDC_Body, KAFAS2 and KOMBI and run a calculated test plan in reighngold in order to calibrate the new touch sensor.

Unfortunately Reighngold is required which was the only reason it took me so long.

I recommend downloading version 3.45 as the other versions gave me trouble when trying to run the calculated test plan.

THANK YOU so much!