Quote:
Originally Posted by spike5150
Which ECU’s did you VO code? BDCBODY, KAFAS and KOMBI as stated earlier in thread? Any FDL coding needed?
|
Here are the FDL codes. You probably don't need to VO code if you set all of these:
ECU Section Function default New Setting
BDC_BODY 3003 ComAdapterPdu_31C_Anzeige_Fahrerassistenzsystem aktiv
BDC_BODY 3140 HOD_Verbaut nicht aktiv aktiv
BDC_BODY 3140 LIN_VARIANTE_MFL ACC_Sport_SLD (21) ACC_Sports_STA [22] ( With M Sport steering wheel )
BDC_BODY 3140 LIN_VARIANTE_SZL szl_us_HW_aic_4Band [1D] ( With M Sport steering wheel )
BDC_BODY 3420 PERSONEN_WARNUNG_STA aktiv
KOMBI 3004 DISP_CC_DRASY_ALIVE aktiv
KOMBI 3004 DISP_CC_DRASY_CRC aktiv
KOMBI 3004 DISP_CC_DRASY_TIMEOUT aktiv
KOMBI 3004 DISP_DRASY_ALIVE aktiv
KOMBI 3004 DISP_DRASY_APPL aktiv
KOMBI 3004 DISP_DRASY_CRC aktiv
KOMBI 3004 DISP_DRASY_TIMEOUT aktiv
KOMBI KL_PREDRIVE_F17_STA aktiv
KOMBI STA_ENABLE aktiv
ICM 3000 C_QalcgRel_v_Tacho_aktiv_mph Werte= 20 Werte= 3F OPTIONAL This will let you increase the speed limit for TJA (MPH)
ICM 3000 C_QalcgRel_v_Tacho_aktiv_kmh Werte= 32 Werte= 63 OPTIONAL This will let you increase the speed limit for TJA (KMH)
ICM 3000 C_STA_Einschraenkung Autobahn keine Einschreankung OPTIONAL This will let you enable the function on all roads
ICM 3000 C_Stauerkennung_on 1 need to set!
ICM 3000 C_Stauassistent_Vorhanden aktiv
63KMH is the highest you can set the speed.