I have a few TPMS questions I hope you folk can help me with.
I just installed a set of new wheels, tires and TPMS sensors.
I went from the 255/19 to staggered 315/20 and 275/20 and did the initial run with the pressures set at rear 39 and front 35 which the Owners manual suggests for the larger tires.
The pressure for the 255's is rear 44 and front 36.
I initiated the tire pressure reset and took it for a run mostly at 70 mph on the interstate - the progress stalled at 49% and then later failed.
Could it be that the pressures weren't what the system needed for the reset?
Tomorrow I'll give it a try at 44 and front 36 psi.
Edit: How can I code the system for the pressures needed for the wider tires?
See attached image of the sensors - the seller re-confirmed that they're correct for my X5.
If this doesn't work I'm considering the Autel MaxiTPMS TS508WF with Autel/Ascot MX programmable sensors and program the original sensors ID's into the new ones.
Can anyone confirm if this will work?
https://autel.com/us/product/maxitpms-ts508wf/
https://autel.com/us/product/adjusta...nsor-aluminum/