Quote:
Originally Posted by JM71
Is there any way to lower the speed at which it activates? Looks to be around 45 mph and 30-35 would be way more useful. I recall reading about this somewhere but can't find it again.
|
It's useful to lower the triggering speed limits while testing the GFHB, especially when test driving with another car. But make it too low or too close together and the HBs flick on and off constantly which can be annoying.
Here is the code (value in kph in hexadecimal):
Below speeds are in HEX VALUE: 00—> 0, 08—> 8, 1F—> 31, 32—> 50, 64—> 100, FF—> 255
BDC_Body / C_HBA_ENA_V_HI / default value = 46 (43 mph) - this is the speed when the HBA enables
BDC_Body / C_HBA_ENA_V_LO / default value = 3C (37 mph)- this is the speed when HBA disables
http://f15.bimmerpost.com/forums/sho...33&postcount=4