Quote:
|
Originally Posted by ///M3PIMP
The truck has 1700 miles not much to clean.
The rears slid on and made a clap sound
The fronts seemed to run out of sliding space 1 mm from making full contact to the hat.
I used the oem bolts direct on the spacer to squeeze it closer and still a paper thin space...
I figured if I torqued it with the wheel to 102 that it would close the gap. Seems to have worked but I will inspect further tonight.
But there seems to be no way to remove the spacer now without a hammer and chisel.
|
In this case I'll be fine lathering the front hubs with anti seize just to play it safe