Quote:
Originally Posted by dwissing
Quote:
Originally Posted by Maverik259
Ya I'll have to do the 5AR and then I'll try just the fdl with the app. They're all in there.
|
You shouldn't have to add 5AR and VO code if you do the FDL coding. One or the other will work.
When you VO code an ECM module, the system looks at your list of installed options (such as 5AR) and sets all of the values within that ECM based on what it believes the vehicle was ordered with. So if you add 5AR and the VO code the modules, it will set the values needed to enable TJA
Alternatively, you can just set the values yourself by FDL coding. It produces the same result.
For example, adding 5AR and then VO coding the KOMBI module will make the following values "aktiv":
KOMBI 3004 DISP_CC_DRASY_ALIVE
KOMBI 3004 DISP_CC_DRASY_CRC
KOMBI 3004 DISP_CC_DRASY_TIMEOUT
KOMBI 3004 DISP_DRASY_ALIVE
KOMBI 3004 DISP_DRASY_APPL
KOMBI 3004 DISP_DRASY_CRC
KOMBI 3004 DISP_DRASY_TIMEOUT
KOMBI KL_PREDRIVE_F17_STA
KOMBI STA_ENABLE
Or you can use the FDL editor and change the values yourself. You don't need to do both. |
Quick edit to this post as it was a bit incomplete.
KOMBI 3000 KL_PREDRIVE_F17_STA - aktive
KOMBI 3003 STA_ENABLE - aktive
but I have coded all of these and still get the TJA error and steering wheel error on my display.
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold)
‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe
'14 X5 50i (wife’s now)