Injector question.

[OG Style]

I'm getting a miss fire on cylinder 1 and 3. We had the injectors out. Can putting them in a different position cause it to miss fire?

[OG Style]

We figured out the problem.

[Clifton]

Originally Posted by OG Style

We figured out the problem.

Please share your findings - Lesson learned are always welcomed. Even if not a DIY guide or writeup, but a simple "we found xyz...."

Same with your thread on the homemade injector removal tool.


It's better to give than receive, my brother - Pastor Clever "Friday"

[OG Style]

The injectors on cylinder one and three were being shut off and give faults. We swapped the ignition coil between one and two and the cylinder one miss fire went away. Three was still miss firing so we swapped the coil between one and three and it fixed the problem. We belive the problem was too much dielectric grease.