05-01-2024, 09:20 PM | #1 |
Registered
0
Rep 2
Posts |
F86 Transfer Box and Alternator Issues - Need Insights on Codes and Compatibility
Hi everyone,
I'm experiencing some issues with my F86 that seem related to the transfer box and possibly the charging system, such as the alternator. I have a series of diagnostic codes that I'm hoping someone might recognize or be able to provide insights on: 1. 901712 HKL Electric Motor Right: Open 2. LMV/VTG (Transfer Case) 44011B: Torque Delivered Outside Torque Characteristic 440102: Oil Wear 440105: Calibration: Faulty 3. ICM (Integrated Chassis Management) - 48002C: ICM, ACC: Interface DSC ABS (Anti-Lock Braking System - DSC) 4. DSC (Dynamic Stability Control) 480A11: Brake Pad Wear Sensor: Front Axle, Replace Brake Pads 48097D: Transfer Box: Fault, Clutch Position Known, No Four-Wheel Drive D358F8: Signal (Status Distribution Longitudinal Moment Front Axle/Rear Axle, 19.3.4) Invalid, Transmitter VTG - D355F8: Signal (Drive Actuator Information, 19.3.4) Invalid, Transmitter VTG -4809AD: DSC: Undervoltage In Vehicle 5. KAFAS (Camera Based Driver Assist Systems) 06C43: Signal (Warning Object Coordination Status, 0x21F) Invalid, Transmitter DSC /ICM Additionally, I am curious about the compatibility of the ACT45L transmission across different BMW xDrive models. Specifically, does the F16 use the same transfer box as the F86? Any guidance or similar experiences would be greatly appreciated. Thank you! |
Post Reply |
Bookmarks |
|
|