monkiboy x5 f15 build thread - cf fender trim installed!

[monkiboy]

Originally Posted by M3HNGRY

Going to give you a PM. Interested in the LED Headlight and Fog Conversion that you did. Only option my f15 is missing Love the build you done

thank you, sir.

[DannyV160]

Monkiboy I was wondering do you still offer the wiring diagram and coding for this. I am about 90% finished with this upgrade but having 2 issues, which maybe coding or wiring unsure.

[monkiboy]

Originally Posted by DannyV160

Monkiboy I was wondering do you still offer the wiring diagram and coding for this. I am about 90% finished with this upgrade but having 2 issues, which maybe coding or wiring unsure.

I do not unfortunately have access or even remember much of it, unfortunately. It was very straightforward, though. Coding wise, reach out to Okee at codemycar.com and tell him I sent you and he will have you taken care of.

[Islamsariful]

Originally Posted by monkiboy

finally got the photos loaded of the LED conversion for anyone interested...

I have also retrofit X5 a
2015 to Adaptive headlight. I did wiring and coding. Everything is okay. Nust side indicating light and side marker ot working. And I did not replace the steering column switch. If you have wiring diagram with solution please share me.

[monkiboy]

Originally Posted by Islamsariful

I have also retrofit X5 a
2015 to Adaptive headlight. I did wiring and coding. Everything is okay. Nust side indicating light and side marker ot working. And I did not replace the steering column switch. If you have wiring diagram with solution please share me.

thanks for the message but I do not understand the question. You are looking for a wiring diagram for the steering column switch? It is straight PnP then coding. No wiring needed, if that is what you meant.

[Islamsariful]

Hi. I am asking about adaptive LED on bmw x5 F15. I install Adaptive LED. WirinG I did. But I donno which VO code to put. I tried with 552 its failed. Then I tried 524, 522. Now indicating light not working. Here I attacged the light picture and current code after codign with 524 and 522.