BMW Coding Thread

[shawnsheridan]

Originally Posted by Mannimans

hi guys,

Can someone please send me the latest files to recode my car post the dealership update?

do i now need to use esys 2 with a new set of psd files?

PM sent.

[shawnsheridan]

Originally Posted by jjftts

Hey guys,

I have just taken delivery of a new 30D which was built in march, I tried coding with psdzdata_541_lite and E-Sys 3.26.1 but I could not read the BDC_BODY module and for HU_NBT module every folder is named "." so dont know which one to click.

But I managed to code IHKA2 module okay.

How would I be able to code the other 2 modules, is't because the psdzdata is not updated? any help is much appreciated.

You must update.

You cannot send or receive PM's yet. Send me one when you can.

[spike5150]

Originally Posted by shawnsheridan

You must update.

I'm having the same issue with my June 2015 build. Can you send me the link for the latest stuff? I have ESYS 3.24.3 and Data revision 55.4.

Thanks!!

[v_x35d]

Feb 2015 build. I got E-Sys v.3.24.3 and v.56.1_PSdZData_Lite. do i need newer files?

[X5chris]

Any coders that can code my car?. Located in the Nyc area. Thanks!

[shawnsheridan]

Originally Posted by spike5150

I'm having the same issue with my June 2015 build. Can you send me the link for the latest stuff? I have ESYS 3.24.3 and Data revision 55.4.

Thanks!!

PM sent.

[shawnsheridan]

Originally Posted by v_x35d

Feb 2015 build. I got E-Sys v.3.24.3 and v.56.1_PSdZData_Lite. do i need newer files?

No. 56.1 PSdZData is the latest, and E-Sys 3.24.3 is good.

[v_x35d]

Originally Posted by X5chris

Any coders that can code my car?. Located in the Nyc area. Thanks!

same area. will code my car and my friends tomorrow. if it works, i'll be able to help you and others.

[v_x35d]

Originally Posted by shawnsheridan

No. 56.1 PSdZData is the latest, and E-Sys 3.24.3 is good.

Thank you Shawn

[spike5150]

Originally Posted by shawnsheridan

PM sent.

Thanks!

[brothfly]

Looking for someone to code my 2014 X5 in the DFW area.
PM me.
Thanks

[Terp335]

Originally Posted by LatinBimmer

Hi all,

When trying to Code using Esys 3.24.3 (new install), I got stuck in step 13. My CAFD modules read didn't show any description of the sub folders.

I can only see the 3000; 3001....3005 etc, but inside those folders, there are only subfolders with a dot as name...and if I try searching for any coding description, there is nothing found...

I'm using my Mac with Boot partition Windows 8
Esys 3.24.3
Token Master

Just getting into this.... Do you need to use a VM with a MAC or can you run esys directly on OS X?

[r33_RGSport]

Originally Posted by Terp335

Just getting into this.... Do you need to use a VM with a MAC or can you run esys directly on OS X?

Need VM or Parallel, or VirtualBox. The main thing, it need to run on windows and have direct access to the Ethernet port.

[realsgy]

Originally Posted by skalberti

Also I'll go ahead and add this since it's not on the cheat sheet. The only thing you'll be missing is the cradle in the console, but you'll have $500 more in your pocket.

For EBT enhanced Bluetooth simply add 6NS to your VO and then VO code HU_NBT, you do not need to remove anything from the VO first.

I did this an Office now works, however I am not able to set a paired phone as Telephone 2

Before coding I did not even have Telephone 1, just Telephone, without the number. So I think something happened towards two phone support, but still, I can only have one phone active at a time.

[Chem14]

Originally Posted by shawnsheridan

In F15, it is TCM_MSA_DEFAULT_OFF instead of TC_MSA_DEFAULT_OFF.

No I am refering to the Eco Pro mode default off (TCM_MSA_ECO_MODE). It is not in the BDC Body. Is it located somewhere else?

[realsgy]

Originally Posted by realsgy

I did this an Office now works, however I am not able to set a paired phone as Telephone 2

Before coding I did not even have Telephone 1, just Telephone, without the number. So I think something happened towards two phone support, but still, I can only have one phone active at a time.

I was able to figure this out, there is a setting in one of the option menus to enable Telephone 2

[X5chris]

Originally Posted by v_x35d

same area. will code my car and my friends tomorrow. if it works, i'll be able to help you and others.

Hey buddy was you able to code your car & your friends?

[v_x35d]

Originally Posted by X5chris

Hey buddy was you able to code your car & your friends?

I finished coding my car:
folding mirrors, disclaimers, dvd in motion, usb video, chimes, sport+ and more

will code my friend's car next Monday

shawnsheridan

[v_x35d]

1) is there a way to enable Eco Pro everytime car starts?

2) how to enable Internet Browser in iDrive?

[mat3333]

Dealer just updated software and wiped all my coding during a service visit. Can someone send me the link for the latest PSDZ data?

[Terp335]

I've coded DVD In Motion which is working; however I've realized that I cannot get a DVD to play on the rear entertainment AND front Nav screen at the same time. Is this a menu setting that I'm missing, something else that needs to be coded, or just not possible? Has anyone else accomplished this?

[shawnsheridan]

Originally Posted by mat3333

Dealer just updated software and wiped all my coding during a service visit. Can someone send me the link for the latest PSDZ data?

PM sent.