BMW Coding Thread

karoshi · 12-27-2016, 02:46 AM

Quote:

Originally Posted by Almaretto

Activate the optional “LIM” function in North American cars

Hi Almaretto. Thanks for your answer. I went through the topic but Speed limiter is already active on my EU spec car so no luck in finding the correct codes.
I'll check the codes mentioned in the post to see whether I can find a hint.

Almaretto · 12-27-2016, 02:24 PM

Quote:

Originally Posted by karoshi

Hi Almaretto. Thanks for your answer. I went through the topic but Speed limiter is already active on my EU spec car so no luck in finding the correct codes.
I'll check the codes mentioned in the post to see whether I can find a hint.

Maybe I misunderstood for what you are looking. LIM function is set by user. The same codes will also allow user to disable distance component of ACC+ for recular DCC.

Neuera09 · 12-27-2016, 04:35 PM

@karoshi

from the X1 thread you posted, is this what you are trying to achieve for your Euro Spec F15? ....

" You have to have the limiter activated. Say, you're doing 30mph with the limiter. Camera detects that you are approaching a 50mph zone. Once you're passed the traffic sign, you should see the new sign readout on HUD with an arrow pointing upwards right next to it. The arrow stays there for a few seconds. Press and scroll up while the arrow is shows and limiter jumps to 50mph from 30. You won't have to hold the rocker to reach 50mph manually....."

Almaretto · 12-27-2016, 05:23 PM

Quote:

Originally Posted by karoshi

Hi Almaretto. Thanks for your answer. I went through the topic but Speed limiter is already active on my EU spec car so no luck in finding the correct codes.
I'll check the codes mentioned in the post to see whether I can find a hint.

I re-read thread. It sounds like speeds adjustments are only suggestions and appear briefly; driver must decide to toggle change with rocker switch. I never use the limiter function so I have not tested if additional coding is required to enable function.

karoshi · 12-28-2016, 02:42 AM

Quote:

Originally Posted by Neuera09

@karoshi

from the X1 thread you posted, is this what you are trying to achieve for your Euro Spec F15? ....

" You have to have the limiter activated. Say, you're doing 30mph with the limiter. Camera detects that you are approaching a 50mph zone. Once you're passed the traffic sign, you should see the new sign readout on HUD with an arrow pointing upwards right next to it. The arrow stays there for a few seconds. Press and scroll up while the arrow is shows and limiter jumps to 50mph from 30. You won't have to hold the rocker to reach 50mph manually....."

Yes that's the function called "speed limit assist" and would be useful for easily adapt the speedlimit...

Almaretto · 12-31-2016, 01:17 AM

Quote:

Originally Posted by karoshi

Yes that's the function called "speed limit assist" and would be useful for easily adapt the speedlimit...

I went ahead and tested my system today and it never suggested adjustments. There must be additional FDL's required. I always thought LIM function was rather limited in functionality (pun intended). I still do not really think I would use feature, but this would make system more useful.

Stinkyxy · 01-01-2017, 06:10 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by bms5

My Canadian spec 35d also doesn't have RDC so am I correct that if I add the 4 sensors to the wheels and code as you mention in the post that it will work properly? No other hardware needed?

If you have the plastic stems then pressure if measure by rotations. If you have the metal stems, there are actual sensors. For the ladder, yes, all you must do is add them and code vehicle.

That's correct. Canadian spec does not come with the tire sensors. If you buy and install the tire sensors you can activate this option via coding.

I bought and installed huf tire sensors sensors for winter and have the vdo for summers.

naveenb12 · 01-03-2017, 11:26 AM

Can I get the software/program links? Thanks!

shawnsheridan · 01-03-2017, 02:30 PM

Quote:

Originally Posted by naveenb12

Can I get the software/program links? Thanks!

PM sent.

naveenb12 · 01-03-2017, 09:38 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks.
I was successfully able to code most of options in cheat sheets 6 months back.
Dealer updated firmware in my car(X5 F15) last week when I went for first service, for installing MPPK.
Now am not able to see options listed under BDC_BODY. I selected the correct series, still BDC_BODY module is getting loaded with only .....

Can someone please update me on how to resolve this issue.

Please find the screen shots attached

shawnsheridan · 01-03-2017, 09:41 PM

Quote:

Originally Posted by naveenb12

Thanks.
I was successfully able to code most of options in cheat sheets 6 months back.
Dealer updated firmware in my car(X5 F15) last week when I went for first service, for installing MPPK.
Now am not able to see options listed under BDC_BODY. I selected the correct series, still BDC_BODY module is getting loaded with only .....

Can someone please update me on how to resolve this issue.

Please find the screen shots attached

Launcher needs to be set for F015, and E-Sys to F025.

Also, "Read Parameters from VCM" should not be checked, and "Series, I-Step Shipment" should be blank.

naveenb12 · 01-03-2017, 10:21 PM

Thanks ,am able to see the options now under BDC_BODY.
I should have read the instructions you sent with software links before starting

tatetrain · 01-04-2017, 09:24 AM

How important is it to have a dedicated laptop? I was planning on using my work laptop.

Neuera09 · 01-04-2017, 02:03 PM

Quote:

Originally Posted by tatetrain

How important is it to have a dedicated laptop? I was planning on using my work laptop.

Depends on how often you'd be coding. If your employer is cool with you installing non work related software, I say try it out. If you find coding is something you'll be doing often then I would buy a laptop just for coding. You don't have to spend a lot of money on one. Good luck.

Bigtop · 01-04-2017, 03:52 PM

Anyone know how to code the compass to be the default in the dash display?
The car will remember your last setting except if you use the compass.

bqvalen · 01-04-2017, 04:20 PM

Can I get the software/program links? Thanks!

Almaretto · 01-04-2017, 08:00 PM

Quote:

Originally Posted by tatetrain

How important is it to have a dedicated laptop? I was planning on using my work laptop.

It is not. I have multiple systems, but my main computer is not just for coding. Software takes up less than 4GB.

Quote:

Originally Posted by Bigtop

Anyone know how to code the compass to be the default in the dash display?
The car will remember your last setting except if you use the compass.

I am not sure there is a way. I assume you mean this compass:

Quote:

Originally Posted by bqvalen

Can I get the software/program links? Thanks!

PM Sent

HZX540e · 01-04-2017, 08:59 PM

Quick question, my headlights (not DRL) seem to be always on even when the sun is out. I don't believe it's always been that way but I just noticed it today. I've done some coding but I remember it working correctly after coding the halos to be 100% all the time. Any ideas?

Neuera09 · 01-04-2017, 09:31 PM

Quote:

Originally Posted by HZX540e

Quick question, my headlights (not DRL) seem to be always on even when the sun is out. I don't believe it's always been that way but I just noticed it today. I've done some coding but I remember it working correctly after coding the halos to be 100% all the time. Any ideas?

Are you sure the switch is on Auto mode versus On?

HZX540e · 01-04-2017, 09:33 PM

Quote:

Originally Posted by Neuera09

Quote:

Originally Posted by HZX540e

Quick question, my headlights (not DRL) seem to be always on even when the sun is out. I don't believe it's always been that way but I just noticed it today. I've done some coding but I remember it working correctly after coding the halos to be 100% all the time. Any ideas?

Are you sure the switch is on Auto mode versus On?

Yes it's on auto mode, dial all the way to the left.

Neuera09 · 01-04-2017, 09:42 PM

deleted.

Almaretto · 01-05-2017, 12:07 AM

Quote:

Originally Posted by HZX540e

Quick question, my headlights (not DRL) seem to be always on even when the sun is out. I don't believe it's always been that way but I just noticed it today. I've done some coding but I remember it working correctly after coding the halos to be 100% all the time. Any ideas?

Did you adjust the sensitivity? Is anything obstructing the light sensor?

12-27-2016, 04:35 PM	#3017
Neuera09 Lieutenant 279 Rep 592 Posts Drives: 2016 X5 Xline with MPPK Join Date: Dec 2015 Location: Northern California iTrader: (0)	@karoshi from the X1 thread you posted, is this what you are trying to achieve for your Euro Spec F15? .... " You have to have the limiter activated. Say, you're doing 30mph with the limiter. Camera detects that you are approaching a 50mph zone. Once you're passed the traffic sign, you should see the new sign readout on HUD with an arrow pointing upwards right next to it. The arrow stays there for a few seconds. Press and scroll up while the arrow is shows and limiter jumps to 50mph from 30. You won't have to hold the rocker to reach 50mph manually....."
	Appreciate 0 Quote

01-03-2017, 11:26 AM	#3022
naveenb12 Registered 0 Rep 4 Posts Drives: BMW X5 35i SDrive Join Date: Jan 2017 Location: Phoenix,AZ iTrader: (0)	Can I get the software/program links? Thanks!
	Appreciate 0 Quote

01-03-2017, 10:21 PM	#3026
naveenb12 Registered 0 Rep 4 Posts Drives: BMW X5 35i SDrive Join Date: Jan 2017 Location: Phoenix,AZ iTrader: (0)	Thanks ,am able to see the options now under BDC_BODY. I should have read the instructions you sent with software links before starting
	Appreciate 0 Quote

01-04-2017, 09:24 AM	#3027
tatetrain Enlisted Member 15 Rep 38 Posts Drives: 2003 E39 530i Join Date: Dec 2015 Location: Houston, Texas iTrader: (0)	How important is it to have a dedicated laptop? I was planning on using my work laptop.
	Appreciate 0 Quote

01-04-2017, 03:52 PM	#3029
Bigtop Private First Class 41 Rep 159 Posts Drives: 2020 G05 M50i Join Date: Nov 2013 Location: Camelot iTrader: (0)	Anyone know how to code the compass to be the default in the dash display? The car will remember your last setting except if you use the compass.
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

01-04-2017, 04:20 PM	#3030
bqvalen Private 52 Rep 97 Posts Drives: 2019 G05, 2016 F15, 2019 XC60 Join Date: Mar 2016 Location: Pittsburgh iTrader: (0)	Can I get the software/program links? Thanks!
	Appreciate 0 Quote

01-04-2017, 08:59 PM	#3032
HZX540e Lieutenant 374 Rep 591 Posts Drives: 2021 X5MC Join Date: Oct 2016 Location: Fairfax, VA iTrader: (0)	Quick question, my headlights (not DRL) seem to be always on even when the sun is out. I don't believe it's always been that way but I just noticed it today. I've done some coding but I remember it working correctly after coding the halos to be 100% all the time. Any ideas?
	Appreciate 0 Quote

01-04-2017, 09:42 PM	#3035
Neuera09 Lieutenant 279 Rep 592 Posts Drives: 2016 X5 Xline with MPPK Join Date: Dec 2015 Location: Northern California iTrader: (0)	deleted. Last edited by Neuera09; 01-04-2017 at 09:48 PM..
	Appreciate 0 Quote