BMW Coding Thread

JayX5-50 · 07-17-2015, 05:33 PM

Hello fellow x5ers! Long time lurker, finally took the plunge and got a 2015 x5.

I was wondering if some one could send me the latest files to code.

Thanks

hotneutron · 07-17-2015, 10:01 PM

Quote:

Originally Posted by shawnsheridan

New I-Levels are not an issue. You can code them as you always have, but must use E-Sys Launcher 2.x to map Trimmed Data back into E-Sys.

PM's sent.

Can you PM me too?

shawnsheridan · 07-17-2015, 10:53 PM

Quote:

Originally Posted by JayX5-50

Hello fellow x5ers! Long time lurker, finally took the plunge and got a 2015 x5.

I was wondering if some one could send me the latest files to code.

Thanks

Quote:

Originally Posted by hotneutron

Can you PM me too?

PM's sent.

wwanthony · 07-17-2015, 11:05 PM

Quote:

Originally Posted by shawnsheridan

New I-Levels are not an issue. You can code them as you always have, but must use E-Sys Launcher 2.x to map Trimmed Data back into E-Sys.

PM's sent.

Shawn. I think I am going to need 2.x also. When you get a chance.....

Thx.

shawnsheridan · 07-17-2015, 11:06 PM

Quote:

Originally Posted by wwanthony

Shawn. I think I am going to need 2.x also. When you get a chance.....

Thx.

PM sent.

Chem14 · 07-18-2015, 12:24 AM

For auto start stop set to off at every startup. That file is missing form bdc-body. Thoughts? Is it no longer present in the new data files?

shawnsheridan · 07-18-2015, 06:29 AM

Quote:

Originally Posted by Chem14

For auto start stop set to off at every startup. That file is missing form bdc-body. Thoughts? Is it no longer present in the new data files?

In F15, it is TCM_MSA_DEFAULT_OFF instead of TC_MSA_DEFAULT_OFF.

BMW_RL · 07-19-2015, 10:35 AM

Quote:

Originally Posted by shawnsheridan

PM's sent.

Can you send latest files to code ? Thanks

shawnsheridan · 07-19-2015, 12:44 PM

Quote:

Originally Posted by BMW_RL

Can you send latest files to code ? Thanks

PM sent.

Paddy_Lux · 07-19-2015, 02:37 PM

Hi guys, few questions re the F15 Cheat sheet:

1. Blank coding description - e.g. DVD in motion, should I also code rows 21 and 22?What's the general rule? Is it that the blank description pertains to the option recently mentioned above?

2. HUD turn signals - I have 6WB, should I code rows 28 and 29?

3. Camera stays on on-drive - seems like PMA module, how can I add it?

shawnsheridan · 07-19-2015, 05:08 PM

Quote:

Originally Posted by Paddy_Lux

Hi guys, few questions re the F15 Cheat sheet:

1. Blank coding description - e.g. DVD in motion, should I also code rows 21 and 22?What's the general rule? Is it that the blank description pertains to the option recently mentioned above?

2. HUD turn signals - I have 6WB, should I code rows 28 and 29?

3. Camera stays on on-drive - seems like PMA module, how can I add it?

I am not familiar with the F15 Cheat Sheet, but I will tell you that HUD Turn Signals do not work in 6WB Kombi, and Cameras are in TRSVC. PMA is the Parking Assist Module.

Paddy_Lux · 07-20-2015, 02:05 AM

Quote:

Originally Posted by shawnsheridan

I am not familiar with the F15 Cheat Sheet, but I will tell you that HUD Turn Signals do not work in 6WB Kombi, and Cameras are in TRSVC. PMA is the Parking Assist Module.

Thanks Shawn. The cheat sheet is in one of the links of the first post btw...

salukutinaveen · 07-21-2015, 12:21 PM

So I took my car out as usual and something weird happened ! I am on the highway and as soon as i hit on brake, transmission is being shifted to neutral and i see the below message on the idrive screen. I had to put the car in park, start it back up and then set it to drive.
I have added race chip last weekend and also did lots of coding.

Could someone pls help me out ! And this happens almost every time i hit brake !

v_x35d · 07-21-2015, 03:53 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Please send the soft and files to code

shawnsheridan · 07-21-2015, 04:38 PM

Quote:

Originally Posted by v_x35d

Please send the soft and files to code

PM sent.

spike5150 · 07-21-2015, 11:03 PM

With ACC stop and go, if the system brings the car to a full stop and then it takes more than 3 seconds for traffic to start moving, you have to push the resume button or tap the gas to get going again. Anyone know if you can code a longer time so the car will start going automatically again, say after 10 or 20 seconds or whatever time you want?

wordsworth03 · 07-22-2015, 05:50 PM

Hello,

i noticed the opasha says we should be choosing F25 when connecting to our car. How about when we initially install the token? There is an F15 option when installing the token but should we be doing F25 instead? Thanks

shawnsheridan · 07-22-2015, 05:54 PM

Quote:

Originally Posted by wordsworth03

Hello,

i noticed the opasha says we should be choosing F25 when connecting to our car. How about when we initially install the token? There is an F15 option when installing the token but should we be doing F25 instead? Thanks

E-Sys Launcher 2.x Car Series = F15
E-Sys Connection Target = F25.

wordsworth03 · 07-22-2015, 05:55 PM

Quote:

Originally Posted by shawnsheridan

E-Sys Launcher 2.x Car Series = F15
E-Sys Connection Target = F25.

Thanks, Shawn!

McDonaldD · 07-23-2015, 12:10 AM

Quote:

Originally Posted by realsgy

Exactly, this is what I meant by turning on the ignition. I rather that I did not have to - like it was in all my previous cars.

Weird choice by BMW as I don't see how anyone could possibly drain the battery with the garage door opener, unless you are prepared to sit there and press it in for a full week.

The garage door opener is not powered while the car is off because if you were to accidentally leave your car unlocked and in your driveway, any passerby could open you car door and then open your garage. One could argue that if the key is in close enough to start the vehicle then the homelink should be active. But some people permanently leave their keys in their vehicle and such a proximity check would cause a vampiric drain on the battery. The other manufacturers, that I've encountered, have no such key-proximity check yet still power the home link transmitter, leaving your home vulnerable.

Mannimans · 07-23-2015, 04:37 AM

hi guys,

Can someone please send me the latest files to recode my car post the dealership update?

do i now need to use esys 2 with a new set of psd files?

jjftts · 07-23-2015, 07:01 AM

Hey guys,

I have just taken delivery of a new 30D which was built in march, I tried coding with psdzdata_541_lite and E-Sys 3.26.1 but I could not read the BDC_BODY module and for HU_NBT module every folder is named "." so dont know which one to click.

But I managed to code IHKA2 module okay.

How would I be able to code the other 2 modules, is't because the psdzdata is not updated? any help is much appreciated.

07-17-2015, 05:33 PM	#1651
JayX5-50 Registered 0 Rep 2 Posts Drives: X5 50i Join Date: Jul 2015 Location: MD, USA iTrader: (0)	Hello fellow x5ers! Long time lurker, finally took the plunge and got a 2015 x5. I was wondering if some one could send me the latest files to code. Thanks
	Appreciate 0 Quote

07-18-2015, 12:24 AM	#1656
Chem14 First Lieutenant 170 Rep 386 Posts Drives: 2018 530e Join Date: Nov 2014 Location: Oregon iTrader: (0)	For auto start stop set to off at every startup. That file is missing form bdc-body. Thoughts? Is it no longer present in the new data files?
	Appreciate 0 Quote

07-19-2015, 02:37 PM	#1660
Paddy_Lux Private 26 Rep 52 Posts Drives: 2015 F15 40d M-Sport Join Date: Oct 2014 Location: Luxembourg iTrader: (0)	Hi guys, few questions re the F15 Cheat sheet: 1. Blank coding description - e.g. DVD in motion, should I also code rows 21 and 22?What's the general rule? Is it that the blank description pertains to the option recently mentioned above? 2. HUD turn signals - I have 6WB, should I code rows 28 and 29? 3. Camera stays on on-drive - seems like PMA module, how can I add it?
	Appreciate 0 Quote

07-21-2015, 12:21 PM	#1663
salukutinaveen Private First Class 37 Rep 117 Posts Drives: 2015 BMW X5 2016 BMW M3 F80 Join Date: May 2015 Location: Northern VA iTrader: (0)	Help pls !!! So I took my car out as usual and something weird happened ! I am on the highway and as soon as i hit on brake, transmission is being shifted to neutral and i see the below message on the idrive screen. I had to put the car in park, start it back up and then set it to drive. I have added race chip last weekend and also did lots of coding. Could someone pls help me out ! And this happens almost every time i hit brake ! Attached Images
	Appreciate 0 Quote

07-21-2015, 11:03 PM	#1666
spike5150 Captain 423 Rep 983 Posts Drives: 2020 X5 M50i Join Date: Jun 2015 Location: Denver Area iTrader: (0)	With ACC stop and go, if the system brings the car to a full stop and then it takes more than 3 seconds for traffic to start moving, you have to push the resume button or tap the gas to get going again. Anyone know if you can code a longer time so the car will start going automatically again, say after 10 or 20 seconds or whatever time you want?
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

07-22-2015, 05:50 PM	#1667
wordsworth03 Private First Class 24 Rep 120 Posts Drives: na Join Date: May 2015 Location: na iTrader: (0)	Hello, i noticed the opasha says we should be choosing F25 when connecting to our car. How about when we initially install the token? There is an F15 option when installing the token but should we be doing F25 instead? Thanks
	Appreciate 0 Quote

07-23-2015, 04:37 AM	#1671
Mannimans Private 9 Rep 66 Posts Drives: F16 X6 50i, E92 M3, E93 M3 Join Date: May 2013 Location: Sydney, Australia iTrader: (0)	hi guys, Can someone please send me the latest files to recode my car post the dealership update? do i now need to use esys 2 with a new set of psd files?
	Appreciate 0 Quote

07-23-2015, 07:01 AM	#1672
jjftts Registered 0 Rep 1 Posts Drives: X5 30D Join Date: Jul 2015 Location: Australia iTrader: (0)	Hey guys, I have just taken delivery of a new 30D which was built in march, I tried coding with psdzdata_541_lite and E-Sys 3.26.1 but I could not read the BDC_BODY module and for HU_NBT module every folder is named "." so dont know which one to click. But I managed to code IHKA2 module okay. How would I be able to code the other 2 modules, is't because the psdzdata is not updated? any help is much appreciated.
	Appreciate 0 Quote