11-27-2023, 05:42 AM | #1 |
New Member
1
Rep 8
Posts |
Aftermarket dash cam connecting to ACE system
Hey all,
I’ve been scouring Facebook and forums for a while…trying to find best connection setup for my 2ch Blackvue camera system…also using the power magic pro. Car is a 2015 X6 M50d (F16). I want to use the front fuse panel…and have found the wiring installation instructions for the BMW ACE system which gets one of the connections from the A258 BDC module located in the footwell. The connection says to use the green wire going to plug B3 pin #1. I looked at the BDC in my car…no wire in pin #1 B3. Checked on ISTA…”not used”. Can anyone tell me if they know what that pin #1 would be connected to on other models? Or… Does someone have a copy of the wiring installation instructions for the ACE system in a 2015 X6? |
11-27-2023, 02:07 PM | #2 |
Colonel
1059
Rep 2,511
Posts |
I would think it should not be different from this:
https://f15.bimmerpost.com/forums/sh....php?t=1217998 |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|