BMW Coding Thread

Maverik259 · 05-16-2018, 08:43 AM

Anyone code the regular cruise control if you have adaptive? I used the cheat sheet but I don't have the values DCC and ACC. Mine has two German words. I selected the one not defaulted but that didn't seem to work.

The two words means
Authorized
Suppressed

So again it was on the lower one (suppressed) and I switched to (authorized) and it didn't seem to do anything. Unless I'm doing it wrong to try and activate. I assumed I just hold the cruise control button down until it does something instead of just press it once.

dwissing · 05-16-2018, 03:37 PM

Quote:

Originally Posted by Maverik259

Anyone code the regular cruise control if you have adaptive? I used the cheat sheet but I don't have the values DCC and ACC. Mine has two German words. I selected the one not defaulted but that didn't seem to work.

The two words means
Authorized
Suppressed

So again it was on the lower one (suppressed) and I switched to (authorized) and it didn't seem to do anything. Unless I'm doing it wrong to try and activate. I assumed I just hold the cruise control button down until it does something instead of just press it once.

You have to hold down the button that is used to select the following distance. You will see a message about disabling adaptive CC. Pressing the follow distance button again will re-activate ACC.

Crasherr · 05-17-2018, 02:35 PM

I'm trying to code the BDC_BODY on my 2018 F15 but I'm getting the spinning circle of death when trying to edit the FDL. I'm using the latest Esys, Launcher Prem, and 4.10.42PSdZData. I was able to code the HU_NBT2, KOMBI, and EGS without problems. Just looking for help.

shawnsheridan · 05-17-2018, 02:44 PM

Quote:

Originally Posted by Crasherr

I'm trying to code the BDC_BODY on my 2018 F15 but I'm getting the spinning circle of death when trying to edit the FDL. I'm using the latest Esys, Launcher Prem, and 4.10.42PSdZData. I was able to code the HU_NBT2, KOMBI, and EGS without problems. Just looking for help.

Asked and answered:

http://f30.bimmerpost.com/forums/sho...ostcount=13405

No need to Crosspost (nor for that giant picture.

)

Maverik259 · 05-17-2018, 05:12 PM

Quote:

Originally Posted by dwissing

Quote:

Originally Posted by Maverik259

Anyone code the regular cruise control if you have adaptive? I used the cheat sheet but I don't have the values DCC and ACC. Mine has two German words. I selected the one not defaulted but that didn't seem to work.

The two words means
Authorized
Suppressed

So again it was on the lower one (suppressed) and I switched to (authorized) and it didn't seem to do anything. Unless I'm doing it wrong to try and activate. I assumed I just hold the cruise control button down until it does something instead of just press it once.

You have to hold down the button that is used to select the following distance. You will see a message about disabling adaptive CC. Pressing the follow distance button again will re-activate ACC.

Haha oh man thank you! I'll give this a try tonight.

Hashtag · 05-20-2018, 12:46 PM

I coded camera stays on during drive, but now my rear camera doesn't automatically turn off after driving forward. It eventually turns off after maybe driving for a minute.

Does anyone know how to code it so it automatically turns off like before?

CatalinP · 05-20-2018, 12:56 PM

You're joking, right?

Hashtag · 05-20-2018, 01:12 PM

Quote:

Originally Posted by CatalinP

You're joking, right?

Nope. I like the feature but prefer that I can pick and choose when to use it, so I'd like it to operate like stock until I need it.

CatalinP · 05-20-2018, 01:15 PM

Surround view cameras / rear view camera are active up to a certain speed. You just disabled that speed threshold, and now you are asking how to enable it again???

Dan_man_001 · 05-20-2018, 01:19 PM

Anyone figured out ambient lighting coding with BimmerCode (after dealer flash)?

Hashtag · 05-20-2018, 01:30 PM

Quote:

Originally Posted by CatalinP

Surround view cameras / rear view camera are active up to a certain speed. You just disabled that speed threshold, and now you are asking how to enable it again???

Yeah, I get that. Im talking more about the auto disable and if there is a certain werte value that will get the camera to turn off after driving a certain distance.

Something similar to what the f30 guys are talking about in this thread http://f30.bimmerpost.com/forums/showthread.php?t=1313695

Maverik259 · 05-20-2018, 10:50 PM

Quote:

Originally Posted by Dan_man_001

Anyone figured out ambient lighting coding with BimmerCode (after dealer flash)?

Can't be done.

Dan_man_001 · 05-21-2018, 11:16 AM

Quote:

Originally Posted by Maverik259

Can't be done.

BimmerCode just updated... any luck?

Bucky_Badger · 05-23-2018, 08:16 PM

I read the FAQ and downloaded all of the software I'll need to code my 2018 X5. I'm currently waiting for an Activation Code to use E-Sys Launcher (via TokenMaster). It sounds like this could take some time.

I read TokenMaster's article on whether you even need a software token:

http://www.bimmerfest.com/forums/sho...d.php?t=785968

If I just want to record the current (default) settings for all of the ECU's, and then disable the legal disclaimer, do I need a software token? If I don't need to wait for the Activation Code to start doing what I want to do, that'd be nice.

Maverik259 · 05-23-2018, 10:59 PM

Quote:

Originally Posted by Bucky_Badger

I read the FAQ and downloaded all of the software I'll need to code my 2018 X5. I'm currently waiting for an Activation Code to use E-Sys Launcher (via TokenMaster). It sounds like this could take some time.

I read TokenMaster's article on whether you even need a software token:

http://www.bimmerfest.com/forums/sho...d.php?t=785968

If I just want to record the current (default) settings for all of the ECU's, and then disable the legal disclaimer, do I need a software token? If I don't need to wait for the Activation Code to start doing what I want to do, that'd be nice.

Nope

Almaretto · 05-25-2018, 12:51 AM

Quote:

Originally Posted by Bucky_Badger

If I just want to record the current (default) settings for all of the ECU's, and then disable the legal disclaimer, do I need a software token? If I don't need to wait for the Activation Code to start doing what I want to do, that'd be nice.

Yes
Tokens are required for FDL Coding and E-sys Coding-Verification.

klooless · 05-26-2018, 11:44 AM

Is there a way to enable auto parking brake on startups via coding?

EJKrew · 05-26-2018, 05:11 PM

Is it possible to code the 2018 X5d to automatically fold the exterior mirrors when you lock the vehicle with the key fob?

delviacv2 · 05-26-2018, 06:47 PM

Quote:

Originally Posted by EJKrew

Is it possible to code the 2018 X5d to automatically fold the exterior mirrors when you lock the vehicle with the key fob?

Yes take at look at the cheat sheet.

Russmov · 05-26-2018, 07:42 PM

Sorry, I’m sure this has been covered before, but does coding void your warranty? There are a few things I’d like to do, but don’t want to risk voiding remaining warranty.

PeanutButterJellyTime · 05-26-2018, 08:15 PM

v.4.10.30_PSdZData_Lite is no longer available? I keep getting a message saying that the file is not available anymore.

Almaretto · 05-26-2018, 09:43 PM

Quote:

Originally Posted by PeanutButterJellyTime

v.4.10.30_PSdZData_Lite is no longer available? I keep getting a message saying that the file is not available anymore.

So download 4.11.22. My link never changes.

05-16-2018, 08:43 AM	#4159
Maverik259 Major General 4140 Rep 7,159 Posts Drives: F90 M5 / F15 50i Join Date: Jun 2017 Location: Virginia iTrader: (1) Garage List 2020 BMW M5 [10.00] 2014 X5 50i [0.00]	Anyone code the regular cruise control if you have adaptive? I used the cheat sheet but I don't have the values DCC and ACC. Mine has two German words. I selected the one not defaulted but that didn't seem to work. The two words means Authorized Suppressed So again it was on the lower one (suppressed) and I switched to (authorized) and it didn't seem to do anything. Unless I'm doing it wrong to try and activate. I assumed I just hold the cruise control button down until it does something instead of just press it once. Attached Images __________________ '07 Yamaha R1 (sold) '06 C55 AMG (sold) ‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe '14 X5 50i (wife’s now)
	Appreciate 0 Quote

05-17-2018, 02:35 PM	#4161
Crasherr New Member 0 Rep 29 Posts Drives: 2018 F15, 2024 G80 Join Date: Oct 2012 Location: Germany iTrader: (0)	Need Help I'm trying to code the BDC_BODY on my 2018 F15 but I'm getting the spinning circle of death when trying to edit the FDL. I'm using the latest Esys, Launcher Prem, and 4.10.42PSdZData. I was able to code the HU_NBT2, KOMBI, and EGS without problems. Just looking for help. Attached Images
	Appreciate 0 Quote

05-20-2018, 12:46 PM	#4164
Hashtag Private 12 Rep 70 Posts Drives: X5 Join Date: Jan 2018 Location: CA iTrader: (0)	I coded camera stays on during drive, but now my rear camera doesn't automatically turn off after driving forward. It eventually turns off after maybe driving for a minute. Does anyone know how to code it so it automatically turns off like before?
	Appreciate 0 Quote

05-20-2018, 12:56 PM	#4165
CatalinP Major 590 Rep 1,261 Posts Drives: BMW X5 F15 2014 3.0xd Join Date: Aug 2017 Location: RO iTrader: (0)	You're joking, right?
	Appreciate 0 Quote

05-20-2018, 01:15 PM	#4167
CatalinP Major 590 Rep 1,261 Posts Drives: BMW X5 F15 2014 3.0xd Join Date: Aug 2017 Location: RO iTrader: (0)	Surround view cameras / rear view camera are active up to a certain speed. You just disabled that speed threshold, and now you are asking how to enable it again???
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

05-20-2018, 01:19 PM	#4168
Dan_man_001 New Member 0 Rep 6 Posts Drives: 2015 F15 X5 3.5 Join Date: Mar 2018 Location: California iTrader: (0)	Anyone figured out ambient lighting coding with BimmerCode (after dealer flash)?
	Appreciate 0 Quote

05-23-2018, 08:16 PM	#4172
Bucky_Badger Registered 2 Rep 3 Posts Drives: 2018 BMW X5 Join Date: Apr 2018 Location: Wisconsin iTrader: (0)	Am I missing something? I read the FAQ and downloaded all of the software I'll need to code my 2018 X5. I'm currently waiting for an Activation Code to use E-Sys Launcher (via TokenMaster). It sounds like this could take some time. I read TokenMaster's article on whether you even need a software token: http://www.bimmerfest.com/forums/sho...d.php?t=785968 If I just want to record the current (default) settings for all of the ECU's, and then disable the legal disclaimer, do I need a software token? If I don't need to wait for the Activation Code to start doing what I want to do, that'd be nice.
	Appreciate 0 Quote

05-26-2018, 11:44 AM	#4175
klooless New Member 23 Rep 10 Posts Drives: F15 X5 50I Join Date: May 2018 Location: Qatar iTrader: (0)	Is there a way to enable auto parking brake on startups via coding?
	Appreciate 0 Quote

05-26-2018, 05:11 PM	#4176
EJKrew New Member 2 Rep 13 Posts Drives: '18 X5d M Sport Join Date: May 2018 Location: Portland OR iTrader: (0)	Is it possible to code the 2018 X5d to automatically fold the exterior mirrors when you lock the vehicle with the key fob?
	Appreciate 0 Quote

05-26-2018, 07:42 PM	#4178
Russmov Major 1328 Rep 1,343 Posts Drives: 2015 BMW X5 xDrive 35i Join Date: May 2018 Location: Ontario iTrader: (0) Garage List 2015 BMW X5 [0.00]	Sorry, I’m sure this has been covered before, but does coding void your warranty? There are a few things I’d like to do, but don’t want to risk voiding remaining warranty.
	Appreciate 0 Quote

05-26-2018, 08:15 PM	#4179
PeanutButterJellyTime '06 525xi, '14 435xi, '17 X5 50i, '16 428xi GC 36 Rep 152 Posts Drives: 2016 428xi GC Join Date: Nov 2015 Location: Vancouver, BC iTrader: (0)	v.4.10.30_PSdZData_Lite is no longer available? I keep getting a message saying that the file is not available anymore.
	Appreciate 0 Quote