Soft close door issue fixed

[dentprotony@gmail.com]

Hope this can help someone with this issue, my soft close stopped operating but would still make sound as if it is trying to function.

[tlow98]

Thanks for posting this! I’m sure I’ll need it in the future.

[suitedcboy]

The cover on latch for lever that cable is the hard part of this job. A heat gun/blow dryer on the cover is a good idea to make it more flexible if temps are cool/cold when you do this job. One of mine suffered a broken tab on the lower end. I used a zip tie to assure it didn't slip down and off. The cover is part of latch and not sold separately.

[dentprotony@gmail.com]

Originally Posted by suitedcboy

The cover on latch for lever that cable is the hard part of this job. A heat gun/blow dryer on the cover is a good idea to make it more flexible if temps are cool/cold when you do this job. One of mine suffered a broken tab on the lower end. I used a zip tie to assure it didn't slip down and off. The cover is part of latch and not sold separately.

💯 good tip on the plastic cover if it ever gets broken. I didn’t know you can’t buy one separately