BMW Coding Thread

[Nkbm82]

They work but I don't have the folder to go to change their settings.

I just really wish the videos would play.

[Neuera09]

Originally Posted by scnick82

They work but I don't have the folder to go to change their settings.

I just really wish the videos would play.

That's good. Ok, try getting into Bdc body and let me know if u are able to code anything in that folder.

[Maxs1234]

Hi, managed to code everything I wanted except two items. I want the DRL's to stay at full brightness with the headlamps... I couldn't find the FLE module.
Also, I saw on another cheat sheet that it was possible to enable the fog lights with the welcome lights. Has anyone ever done this in this thread? If so, could you please show me how?

Thank you guys. Coded for the first time today with no errors! Proud of my self !

[Neuera09]

Originally Posted by Maxs1234

Hi, managed to code everything I wanted except two items. I want the DRL's to stay at full brightness with the headlamps... I couldn't find the FLE module.
Also, I saw on another cheat sheet that it was possible to enable the fog lights with the welcome lights. Has anyone ever done this in this thread? If so, could you please show me how?

Thank you guys. Coded for the first time today with no errors! Proud of my self !

Good job Max.

I tried looking for the FLE module as well but didn't find it. I haven't tried it since. I haven't tried the LED foglight code either. Post your specific question and someone will chime in.

[Maxs1234]

Thank you! Hopefully someone will figure it out!

[Doanster]

The FLEs show up after you VO-code to remove 5AP and 8S4 if I'm not mistaken. The first one is for Anti-Dazzle while the second is for VLD. I have a pre-FLE car, but the equivalent for me are the LHM modules. They didn't show up until after I VO-coded.
so, depending on how important those last two features are to you, you can VO-code, but it'll wipe out everything you've just coded.

[Maxs1234]

Originally Posted by Doanster

The FLEs show up after you VO-code to remove 5AP and 8S4 if I'm not mistaken. The first one is for Anti-Dazzle while the second is for VLD. I have a pre-FLE car, but the equivalent for me are the LHM modules. They didn't show up until after I VO-coded.
so, depending on how important those last two features are to you, you can VO-code, but it'll wipe out everything you've just coded.

Thank you so much for your response. Will look into it. Don't know if it's worth it after all that hard work!!

[Maxs1234]

Hi, Having trouble getting this code to work :

Unlock when STOP Engine :
BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK

When I click to select active , there is only one option of not active.

Any ideas ???

[Doanster]

Originally Posted by Maxs1234

Hi, Having trouble getting this code to work :

Unlock when STOP Engine :
BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK

When I click to select active , there is only one option of not active.

Any ideas ???

Very strange. I recently coded it on, then off again since my wife didn't like it. Have you tried more than once, i.e. disconnect then re-start again?

[Maxs1234]

Yes. No luck. I had vo coded the whole bcd body folder back to stock even.

[Nkbm82]

Originally Posted by Neuera09

That's good. Ok, try getting into Bdc body and let me know if u are able to code anything in that folder.

I was able to get the usb video to work in motion but I can't access anything in the BDC_Body folder or the ICAM folder.

[Irishfan]

Hi Shawn, could you please send me the latest e-sys and psdzdata for the F15? Thanks very much!!

[shawnsheridan]

Originally Posted by Irishfan

Hi Shawn, could you please send me the latest e-sys and psdzdata for the F15? Thanks very much!!

PM sent.

[Almaretto]

Originally Posted by Maxs1234

Hi, Having trouble getting this code to work :

Unlock when STOP Engine :
BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK

When I click to select active , there is only one option of not active.

Any ideas ???

I noticed that certain CAFD, especially cafd_000017be.caf.042_010_054 and later, only have nicht_aktiv (werte=00) as an option.

But, cafd_000017be.caf.005_218_003, for example, has aktiv (werte=01) and nicht_aktiv (werte=00).

Did you try changing just the werte value to 01?

[Neuera09]

Originally Posted by scnick82

I was able to get the usb video to work in motion but I can't access anything in the BDC_Body folder or the ICAM folder.

Sorry for the delay in my response. Pls contact Shawn, you probably have to reinstall PSzData n Esys. After my visit to the dealer yesterday, I have to reinstall the same programs. Keep us posted.

[shawnsheridan]

Originally Posted by scnick82

I was able to get the usb video to work in motion but I can't access anything in the BDC_Body folder or the ICAM folder.

Originally Posted by Neuera09

Sorry for the delay in my response. Pls contact Shawn, you probably have to reinstall PSzData n Esys. After my visit to the dealer yesterday, I have to reinstall the same programs. Keep us posted.

PM sent.

[Maxs1234]

Originally Posted by Almaretto

I noticed that certain CAFD, especially cafd_000017be.caf.042_010_054 and later, only have nicht_aktiv (werte=00) as an option.

But, cafd_000017be.caf.005_218_003, for example, has aktiv (werte=01) and nicht_aktiv (werte=00).

Did you try changing just the werte value to 01?

Just changed. Will let you know after a drive. Doesn't seem to work... When changed to werte = 01 , it changed status to unknown but hasn't worked yet. Maybe with time ?

[financeman01]

I am also having the same trouble:

"BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK" shows only nicht_aktiv.

Please let us know if you have any success after changing the werte value as this is one of favorite features.

[Maxs1234]

Originally Posted by financeman01

I am also having the same trouble:

"BDC_BODY 3040 VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK" shows only nicht_aktiv.

Please let us know if you have any success after changing the werte value as this is one of favorite features.

I tired it and it doesn't seem to be working. Even after a 20 minute drive and I came back home, it didn't unlock. Any suggestions any body? Also one of my favorite functions.

[bqvalen]

Hi Shawn,

Could you send me a link to the latest SW pls.

Best,

Brian

[shawnsheridan]

Originally Posted by bqvalen

Hi Shawn,

Could you send me a link to the latest SW pls.

Best,

Brian

PM sent.

[Almaretto]

Originally Posted by Maxs1234

I tired it and it doesn't seem to be working. Even after a 20 minute drive and I came back home, it didn't unlock. Any suggestions any body? Also one of my favorite functions.

It was just a guess so may not work.

Some functions take over 30 minutes to work, but I am not sure about this one since this happens to one I have never had any interest.

Driving can usually clear errors but I have not read that time spent driving will lock in newly coded functions. You might try turning off car and coming back to see if the coding worked. Also, specifically to this function, I think I remember reading that the doors must auto-lock while driving away in order to auto-unlock. This is similar to coding to fold mirrors; if door button is used to close them, then they will not auto-unfold with door unlock.