04-06-2022, 08:50 AM | #1 |
First Lieutenant
227
Rep 325
Posts |
screwed up my door panel with rubbing alcohol - how to fix?
So I was cleaning the goop off the passenger door handle as it has been deteriorating over time due to the heat. Come to find out I was being too liberal with the rubbing alcohol and it started to drip down
I tried to catch it with the towel and clearly made things 100 times worse I now ordered a new pull handle but my door is destroyed I read online to use paints like SEMs or Duplicolor but I'm not sure if that will truly fix it or if I should take it to a pro to dye Thanks |
04-06-2022, 09:10 AM | #2 |
Private First Class
69
Rep 162
Posts |
I'm kind of surprised rubbing alcohol did that but regardless I have had amazing results with this product from Eastman. As long as you prep the surface (which means basically clean it) this will amaze you.
https://www.eastwood.com/ew-plastic-...=google&wv=3.1 You don't have to take the panel off. Just mask everything off and spray. The key is light coats and more is NOT better. Will bring that back to new looking Last edited by momoboy; 04-06-2022 at 09:26 AM.. |
Appreciate
0
|
04-06-2022, 09:53 AM | #3 | |
First Lieutenant
227
Rep 325
Posts |
Quote:
Thank you! Will give it a try |
|
Appreciate
0
|
04-06-2022, 10:10 AM | #4 |
Private
62
Rep 66
Posts |
|
Appreciate
0
|
04-06-2022, 02:21 PM | #6 | |
First Lieutenant
227
Rep 325
Posts |
Quote:
I found a local guy that's going to come out and do it tomorrow (recommended by my shop) for $100 so problem solved Thanks everyone |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|