Traffic Jam assistant

[Maverik259]

Originally Posted by David3

Just in the FWIW department, I got TJA working on my '15 MY using the Quidzel chip. I have it coded to work up to 63mph, but above 45 or so, I switch it off as it gets a bit scary. Otherwise, it works well.

That's great. Still haven't gotten mine to work. $300 down the drain. Did you use Esys? What did you go since esys has stopped being supported with the codes?

[InsipidMonkey]

Originally Posted by Maverik259

That's great. Still haven't gotten mine to work. $300 down the drain. Did you use Esys? What did you go since esys has stopped being supported with the codes?

You just have to set the system date back and run the rearm script. Post in the coding thread if you need links to download.

Instructions for coding TJA with E-Sys are at the bottom of the page here: https://quidzel.com/

[Maverik259]

Originally Posted by InsipidMonkey

You just have to set the system date back and run the rearm script. Post in the coding thread if you need links to download.

Instructions for coding TJA with E-Sys are at the bottom of the page here: https://quidzel.com/

I have esys. But I've also coded all the codes already via expert mode in the app and it still gives me an error.

[MK2018]

Is TJA can be coded with BimmerCode?

[InsipidMonkey]

Originally Posted by Maverik259

I have esys. But I've also coded all the codes already via expert mode in the app and it still gives me an error.

Did you VO code the car to add 5AR? That's all I did to get it to work. Make sure you code the ECUs after you modify the VO.

Originally Posted by MK2018

Is TJA can be coded with BimmerCode?

From quidzel.com:
2.) can I use the Bimmercode app & V-gate dongle?

– As of 9/12/2018 – Perhaps in the future on some models. Bimmercode->expert_mode does offer FDL coding of the modules, but we haven’t yet heard of someone successfully coding TJA using Bimmercode FDL coding. We definitely recommend e-sys for now.

[MK2018]

Originally Posted by InsipidMonkey

Did you VO code the car to add 5AR? That's all I did to get it to work. Make sure you code the ECUs after you modify the VO.

From quidzel.com:
2.) can I use the Bimmercode app & V-gate dongle?

– As of 9/12/2018 – Perhaps in the future on some models. Bimmercode->expert_mode does offer FDL coding of the modules, but we haven't yet heard of someone successfully coding TJA using Bimmercode FDL coding. We definitely recommend e-sys for now.

Thanks

[MK2018]

Any one in Vancouver area with e-sys who can help?

[Maverik259]

Originally Posted by InsipidMonkey

Did you VO code the car to add 5AR? That's all I did to get it to work. Make sure you code the ECUs after you modify the VO.

From quidzel.com:
2.) can I use the Bimmercode app & V-gate dongle?

– As of 9/12/2018 – Perhaps in the future on some models. Bimmercode->expert_mode does offer FDL coding of the modules, but we haven't yet heard of someone successfully coding TJA using Bimmercode FDL coding. We definitely recommend e-sys for now.

Haha basically exactly what I said. Used the app but didn't get it to work.

[gwes]

Originally Posted by InsipidMonkey

Did you VO code the car to add 5AR? That's all I did to get it to work. Make sure you code the ECUs after you modify the VO.



From quidzel.com:
2.) can I use the Bimmercode app & V-gate dongle?

– As of 9/12/2018 – Perhaps in the future on some models. Bimmercode->expert_mode does offer FDL coding of the modules, but we haven’t yet heard of someone successfully coding TJA using Bimmercode FDL coding. We definitely recommend e-sys for now.

Looks like if you want to do it in Bimmercode using expert mode (without changing your FA) you'd need to code the following:

<<< ICMQL >>>
ICMQL > Daten 3000 > C_Sperrtrigger_dynamisch_CTR_VIB_STW = aus
ICMQL > Daten 3000 > C_Sperrtrigger_dynamisch_ST_COOR_VIB_STW = aus
ICMQL > Daten 3000 > C_Stauassistent_vorhanden = aktiv

<<< BDC_01 >>>
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_31C_Anzeige_Fahrerassistenzsystem = aktiv
BDC_01 > PfLinSteeringWheel 3140 > HOD_VERBAUT = aktiv
BDC_01 > PfSarahMaster 3420 > PERSONEN_WARNUNG_STA = aktiv

<<< HU_NBT_EVO >>>
HU_NBT_EVO > KOMBI 300D > KOMBI_CIC = kombi_high

<<< KOMBI L6 BO >>>
KOMBI L6 BO > Anzeige_Konfiguration 3000 > KL_PREDRIVE_F17_STA = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_CC_DRASY_ALIVE = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_CC_DRASY_CRC = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_CC_DRASY_TIMEOUT = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_ALIVE = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_APPL = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_CRC = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_TIMEOUT = aktiv
KOMBI L6 BO > FZG_Ausstattung 3003 > STA_ENABLE = aktiv

I'm not sure how extensive the options for coding are in expert mode or if all ECUs are available though.

gwes

[MK2018]

Originally Posted by gwes

Looks like if you want to do it in Bimmercode using expert mode (without changing your FA) you'd need to code the following:

<<< ICMQL >>>
ICMQL > Daten 3000 > C_Sperrtrigger_dynamisch_CTR_VIB_STW = aus
ICMQL > Daten 3000 > C_Sperrtrigger_dynamisch_ST_COOR_VIB_STW = aus
ICMQL > Daten 3000 > C_Stauassistent_vorhanden = aktiv

<<< BDC_01 >>>
BDC_01 > ComAdapterNetworkDtc 3003 > ComAdapterPdu_31C_Anzeige_Fahrerassistenzsystem = aktiv
BDC_01 > PfLinSteeringWheel 3140 > HOD_VERBAUT = aktiv
BDC_01 > PfSarahMaster 3420 > PERSONEN_WARNUNG_STA = aktiv

<<< HU_NBT_EVO >>>
HU_NBT_EVO > KOMBI 300D > KOMBI_CIC = kombi_high

<<< KOMBI L6 BO >>>
KOMBI L6 BO > Anzeige_Konfiguration 3000 > KL_PREDRIVE_F17_STA = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_CC_DRASY_ALIVE = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_CC_DRASY_CRC = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_CC_DRASY_TIMEOUT = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_ALIVE = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_APPL = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_CRC = aktiv
KOMBI L6 BO > ERM_Konfiguration 3004 > DISP_DRASY_TIMEOUT = aktiv
KOMBI L6 BO > FZG_Ausstattung 3003 > STA_ENABLE = aktiv

I'm not sure how extensive the options for coding are in expert mode or if all ECUs are available though.

gwes

I'll try that over the weekend

Thanks

[gwes]

Originally Posted by MK2018

I'll try that over the weekend

Thanks

Let me know if it works.

gwes

[Muzza]

Is there any option to replace the distance control button with the congestion assistant button without buying a whole new wheel?

[TheUltimateDrivingManiac]

Originally Posted by Muzza

Is there any option to replace the distance control button with the congestion assistant button without buying a whole new wheel?

sure, just get a new buttons unit.

[Maverik259]

Originally Posted by Muzza

Is there any option to replace the distance control button with the congestion assistant button without buying a whole new wheel?

[IMG]https://encrypted-tbn0.gstatic.com/i...AgXcdsQvop3yWi[/IMG]

Don't need to. But I get it.

[Muzza]

Originally Posted by Maverik259

Don't need to. But I get it.

Yes more for the OCD completionist.

[MK2018]

Is TJA gets activated automatically?

[TheUltimateDrivingManiac]

Originally Posted by MK2018

Is TJA gets activated automatically?

Nope. You have to press a couple of buttons.

[MK2018]

Originally Posted by TheUltimateDrivingManiac

Nope. You have to press a couple of buttons.

Which ones? Maybe there is no point to code it if I won't be able to turn on, not sure if I have them

[InsipidMonkey]

Originally Posted by MK2018

Which ones? Maybe there is no point to code it if I won't be able to turn on, not sure if I have them

To retrofit:
You need 5AT (DA+ w/ACC) and either the Euro steering wheel with the capacitive sensor or the Quidzel module. VO code 5AR, and FDL code if you want to increase the speed it works at.

To use:
1) Enable Cruise Control, then 2) press the lower right button in the left button group:
Edit: I just tested this and found out you can enable TJA with just button 2, you don't need to turn on cruise control first.

[MK2018]

Originally Posted by InsipidMonkey

To retrofit:
You need 5AT (DA+ w/ACC) and either the Euro steering wheel with the capacitive sensor or the Quidzel module. VO code 5AR, and FDL code if you want to increase the speed it works at.

To use:
1) Enable Cruise Control, then 2) press the lower right button in the left button group:
Attachment 2046668

Thanks for the info

I don't have these buttons.
What's included in DA+ package and ACC?

[InsipidMonkey]

Originally Posted by MK2018

Thanks for the info

I don't have these buttons.
What's included in DA+ package and ACC?

KAFAS camera for lane departure warning and radar for active cruise control, both required for TJA.

ZDB Driver Assistance Plus:
5AG Active Blind Spot Detection
5AS Active Driving Assistant
or 5AT ACC Stop & Go + Active Driving Assistant <-- Need this
5DL Surround View
8TH Speed Limit Information

[gwes]

Originally Posted by MK2018

Thanks for the info

I don't have these buttons.
What's included in DA+ package and ACC?

I might be wrong, but I think in Canada these packages are slightly different - I know on my car I don't have the DA+ package, just the DA package and it comes with all of the options InsipidMonkey mentioned. DA+ adds ACC Stop and Go, which to make things more confusing also has it's own option code.

The description of DA+ in the Canadian configurator for the 2018 model year is: "Driving Assistant Plus adds full collision braking function and Active Stop-and-Go Cruise Control."