Spacers with stock wheels

[Scott2.0]

Thinking about adding some 15mm front and 20mm rear spacers with my 469 wheels to gain a little aggression out of their look. Anything wrong with ECS spacers over H&R? They're a bit cheaper.

Anything else I should know or consider before I pull the trigger? With a jack and stands, is there any reason why I wouldn't be able to easily install them on my own? Thanks!

[spike5150]

15 might not work up front. Some folks had issues.

http://f15.bimmerpost.com/forums/sho...1189485&page=1

Yes, easy to install. Be sure to use anti-seize compound on the hubs or spacers may be a bitch to remove.

[Scott2.0]

Originally Posted by spike5150

15 might not work up front. Some folks had issues.

http://f15.bimmerpost.com/forums/sho...1189485&page=1

Yes, easy to install. Be sure to use anti-seize compound on the hubs or spacers may be a bitch to remove.

Awesome informative thread, thanks for sharing.