09-20-2020, 12:05 PM | #1 |
Private
14
Rep 59
Posts |
How to remove tailgate trim?
Hi all!
The lock actuator (part # bmw 51 24 7 269 543) gave out on our 2015 X5. To replace this, I need to remove part #bmw 51497294791. This is the rear tailgate plastic trim piece that the handle attaches to (#14 in image). Any help is greatly appreciate! thank you! |
09-20-2020, 12:15 PM | #2 |
Banned
1636
Rep 2,995
Posts |
https://www.newtis.info/
Try that site |
Appreciate
0
|
09-20-2020, 01:00 PM | #3 |
Major General
4448
Rep 7,489
Posts |
Just a tip in regards to the part database illustrations...the encircled numbers always refer to hardware (screws/bolts/nuts/fasteners/etc). So the part you’re referring to would actually be #13.
__________________
2015 F06 650ix Gran Coupe`(Moonstone/Cohiba Brown)| 2014 F15 X5 50i MSport (Space Gray/Mocha)
Become a BMW CCA member! Click HERE to join and feel free to use my BMW CCA member #191509 as a referral. |
Appreciate
0
|
09-20-2020, 04:28 PM | #4 |
Major
1023
Rep 1,168
Posts |
Undo the 5 screws that hold the inside panel #9. Remove the release handle. Then lift it and peak inside - you'll see how #13 attaches to it with several tabs. Undo them one by one starting with the outside ones, to separate 13 from 9. Then pull 13 hard - there're 2 clips attaching it to the tailgate.
When assembling back, spray silicon and/or put felt tape along the edges to reduce squeaks/rattle. Last edited by smyles; 09-20-2020 at 05:20 PM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|