04-06-2016, 09:47 AM | #1 |
Captain
43
Rep 708
Posts |
HRE 940RL 22x12 22x10.5 with Pirellis
I have to trade my X5 for a truck so it is with great sorrow I also have to sell these wheels. These are my favorite wheels I've owned. They broke necks everywhere I went with them. These were fully rebuilt last Spring and are 100% perfect. Honestly they are better than new - barrels are powdercoated gloss black. Faces are handbrushed and cleared. Lips are polished and also cleared. Very low maintenance and look amazing. In person and in photos. Zero curb rash. These should fit the F15 and F16 X cars. Will need one set of hubcentric rings to adapt to the smaller hub on the (fronts?) of the M cars. I will provide those if the purchaser needs. These were built for an E71 X6 M so the fitment is perfect on any M or M Sport. I ran these on my E70 50i. I like a very flush fitment, so I ran 12mm spacers all around to achieve the look I wanted. Tires are Pirelli Scorpions. 335/25 rear and 295/30 front. Great tires. One of the rears has a couple of chunks out of the sidewall. Long story there, but Tirerack wouldn't replace it. I only put 4 months on these, so maybe 5k miles on them. (Edit: The fronts have more miles on them, I'm guessing around 12k. They are still good though.) They are in great shape. I can get tread depth measurements if needed. These have E70 TPMS included. I do not know if the TPMS will work on the F bimmers. Price is more or less firm. I will ship but buyer pays shipping. These are in winter storage currently and I won't be able to ship or deliver until after 4/15 when my work slows down. Wanted to list now to work out details with eventual buyer in the meantime. IM me for any questions, more pictures, etc. Fronts: 22x10.5 ET 31; Barrel = 7.5" and Lip = 3" Rears: 22x12 ET25; Barrel = 8.5" and Lip = 3.5" Last edited by rennis; 06-14-2016 at 04:47 PM.. Reason: adding offsets and widths |
04-09-2016, 09:17 PM | #3 |
Major
687
Rep 1,328
Posts |
With these wheels setup for an E70 X5M, they will run a hub bore of 74.1 in the front and 72.5 in the rear (regular E70 X5) runs 74.1 front and rear. The F15/F85 run 74.1 front and rear, so a buyer would need to increase the bore on the rear wheels to 74.1.
The other thing to consider as asked above is the offset. Anything around 20 is going to be an issue as from the pictures your already running a very agressive setup. These wheels will likely sit out from the guard by 1-2cm. Best to be sure about full details of the wheels before advising they 'should' fit an F15/F85. I only know this as I've gone through the exact same situation on a set of ADV wheels from an E70 M50d which runs the X5M 74.1/72.5 split. Apologies if this seems negative, however buyers may not be aware. Stunning wheels. Hope they find a good home. |
Appreciate
2
ericliuhc324.00 |
04-11-2016, 11:30 AM | #4 | |
Captain
43
Rep 708
Posts |
Quote:
HRE does not publish offsets - but I measured these once upon a time and if memory serves they were around et33. I will see if I can take one of these down to a friend's shop and see if he'll re-measure for me this week. Pictured above I'm running additional spacers (15mm and 12mm) so these shouldn't be too aggressive at all on a F15 or F85. Great questions! |
|
Appreciate
0
|
04-11-2016, 09:31 PM | #5 | |
Captain
548
Rep 944
Posts |
Offsets are on the back of the hub. They provide the full specs. I am running low 20 et on my rears so if you have 20m spacers most likely these wheels weren't made for the x5 chassis or they were super conversative.
Not sure the point of custom wheels if you need to run spacers Quote:
|
|
Appreciate
0
|
04-11-2016, 09:40 PM | #6 |
Major
687
Rep 1,328
Posts |
My bad - for some reason I thought you had these on an E70 X5M. If they're 74.1 all around than no issue on the F15/F85.
Can you check the inside of the wheels for the offsets? Would go a long way to helping potential buyers, including myself!
__________________
2020 BMW X3M Competition ///M - ALPINE WHITE / SAKHIR ORANGE Past: 18' BMW M3CS | 18' BMW X5M | '17 BMW M3 Competition | '16 Mercedes GLC250 | '16 BMW X5M | '15 BMW X5 M50d | '14 Audi SQ5 |
Appreciate
0
|
04-12-2016, 09:16 AM | #7 | |
Captain
43
Rep 708
Posts |
Quote:
BUT! I went back through my emails with a buddy who wanted to know the specs on these when I finished them last year and found the measurements I had done Rear - 22x12 ET32 Front - 22x10.5 ET35 Thanks for following up |
|
Appreciate
0
|
04-12-2016, 09:17 AM | #8 | |
Captain
43
Rep 708
Posts |
Quote:
I was running 15mm spacers in the rear and 12mm in the front. Offsets aren't on the back of the wheels, HRE doesn't stamp them. |
|
Appreciate
0
|
04-19-2016, 11:20 PM | #11 |
Major
687
Rep 1,328
Posts |
Sent you a PM regarding shipping to Australia
__________________
2020 BMW X3M Competition ///M - ALPINE WHITE / SAKHIR ORANGE Past: 18' BMW M3CS | 18' BMW X5M | '17 BMW M3 Competition | '16 Mercedes GLC250 | '16 BMW X5M | '15 BMW X5 M50d | '14 Audi SQ5 |
Appreciate
0
|
05-03-2016, 03:00 PM | #14 |
Captain
43
Rep 708
Posts |
I called HRE for exact specs on offsets and widths, I was off a little on my numbers above (my buddy must not be very good at measuring...)
Fronts: 22x10.5 ET 31; Barrel = 7.5" and Lip = 3" Rears: 22x12 ET25; Barrel = 8.5" and Lip = 3.5" |
Appreciate
0
|
05-26-2016, 12:19 PM | #16 |
Captain
548
Rep 944
Posts |
These offsets are much more inline
Interested but not at your price. If you decide for a price reduction let me know |
Appreciate
0
|
06-11-2016, 04:11 PM | #18 |
Registered
0
Rep 2
Posts |
[QUOTE=rennis;19706458]I have to trade my X5 for a truck so it is with great sorrow I also have to sell these wheels. These are my favorite wheels I've owned. They broke necks everywhere I went with them.
These were fully rebuilt last Spring and are 100% perfect. Honestly they are better than new - barrels are powdercoated gloss black. Faces are handbrushed and cleared. Lips are polished and also cleared. Very low maintenance and look amazing. In person and in photos. Zero curb rash. These should fit the F15 and F16 X cars. Will need one set of hubcentric rings to adapt to the smaller hub on the (fronts?) of the M cars. I will provide those if the purchaser needs. These were builtor an E71 X6 M so the fitment is perfect on any M or M Sport. I ran these on my E70 50i. I like a very flush fitment, so I ran 12mm spacers all around to achieve the look I wanted. Tires are Pirelli Scorpions. 335/25 rear and 295/30 front. Great tires. One of the rears has a couple of chunks out of the sidewall. Long story there, but Tirerack wouldn't replace it. I only put 4 months on these, so maybe 5k miles on them. (Edit: The fronts have more miles on them, I'm guessing around 12k. They are still good though.) They are in great shape. I can get tread depth measurements if needed. These have E70 TPMS included. I do not know if the TPMS will work on the F bimmers. Price is more or less firm. I will ship but buyer pays shipping. These are in winter storage currently and I won't be able to ship or deliver until after 4/15 when my work slows down. Wanted to list now to work out details with eventual buyer in the meantime. IM me for any questions, more pictures |
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|