Crank shaft sensor fault

[Dasun_krishantha]

Hi guys let me brief fault directly. Please let me know if any one having a clue to sort this out.
1. Vehicle - X5 f15 Xdrive 40e iperformance SAV
2. Engine - N20
3. Complaint - Rough idle on cold start and stops some times. Back fires and misfire. Drive train fault display on cluster.
4. Fault on scanner - 160001 crankshaft sensor no signal.
5. What I have done so far - wiring check it's fine. Voltage supply to sensor checked its fine. Replaced crank sensor. Replaced flywheel as inner plate is having excessive play. Checked air inlet lines and turbo actuator. Waste gate actuator change and basic setting done. Two map sensors clean and replaced.

[evogeno89]

Originally Posted by Dasun_krishantha

Hi guys let me brief fault directly. Please let me know if any one having a clue to sort this out.
1. Vehicle - X5 f15 Xdrive 40e iperformance SAV
2. Engine - N20
3. Complaint - Rough idle on cold start and stops some times. Back fires and misfire. Drive train fault display on cluster.
4. Fault on scanner - 160001 crankshaft sensor no signal.
5. What I have done so far - wiring check it's fine. Voltage supply to sensor checked its fine. Replaced crank sensor. Replaced flywheel as inner plate is having excessive play. Checked air inlet lines and turbo actuator. Waste gate actuator change and basic setting done. Two map sensors clean and replaced.

Hello, I'm having the exact same problem, did you fixed it?