Interior trim wrap Carbon Fiber gloss or regular 3m

[gqt5013]

So I ordered the 3M standard CF wrap and a high gloss one as well to wrap my aluminum trim on my black m sport 35i. Based on images I have seen, the M Performance CF trim kit seems to have a slight gloss to it and I love the way it looks, just not a fan of the Alcantara. (Had an Alcantara steering wheel on a 330 zhp and it was a pain to keep clean and replaced it a couple times. told myself never again especially on a daily driver).

Anyway, thought I woud ask members on here for their opinions. I understand some have strong opinions agaisnt wrapping the interior of a car like this, but to each their own. Let me know your thoughts: Gloss or No Gloss?

[IMG]undefined[/IMG]

[d_v_o_1]

Gloss 100% if you want it to look similar to oem. I'm not sure why anyone would be against it, the options and quality of the vinyl these days is top notch.

[DuSh]

Both look good to me, but gloss is beautiful! ironically I ordered similar CF roll to wrap my aftermarket roof spoiler

[CeeTeeX5]

Personally like the non-gloss version as it still does have some glossiness to it and creates a more textural appearance.

[LocksmithNick]

Dang, that’s a tough call. I like them both. Post pics when you’re done!

[spike5150]

In the process of doing mine in gloss. Dash and center console done so far. The gloss fits with the glossy black part of the dash better IMO.

[gqt5013]

Thanks all! I will be going on the gloss side as it is the closest to real CF. I just purchased another gloss product and I will decide which one and see if there is any difference.

[gqt5013]

Originally Posted by spike5150

In the process of doing mine in gloss. Dash and center console done so far. The gloss fits with the glossy black part of the dash better IMO.

Which product did you go with?

[spike5150]

VVIVID Epoxy High Gloss Black Carbon Fiber Vinyl Automotive Car Wrap Film DIY Interior (2ft x 5ft)

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[d_v_o_1]

Here are all the gloss carbon fiber finishes offered by metro restyling. I believe the vivid version (above) is one of the best out there at the moment

The entire top row are "printed" and don't look authentic at all. Wouldn't use any of those

Second row is more realistic with a pattern you can feel but lacks a real gloss finish.

The best of the samples if you ask me is the cheapest one - Metro HD Flexible Carbon Fiber

The 5D Carbon Fiber available from China is actually the most realistic print I have found. It tends to be thicker with less tack, but looks so much better then all these.

Anyway - hope this helps a bit

[gqt5013]

Originally Posted by spike5150

VVIVID Epoxy High Gloss Black Carbon Fiber Vinyl Automotive Car Wrap Film DIY Interior (2ft x 5ft)

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

thats the one I currently have. I might order the 5D as well and do a comparison

[aw305]

I used 3m 1080 cf for my trim

[mikeson]

Wow, that looks really nice.
Did you do by yourself?

[aw305]

Originally Posted by mikeson

Wow, that looks really nice.
Did you do by yourself?

Yes, took the better portion of the day as you need to disassemble the doors to get the trim off to wrap. scale from 1-10 I would rate it a 4

[spike5150]

Originally Posted by spike5150

VVIVID Epoxy High Gloss Black Carbon Fiber Vinyl Automotive Car Wrap Film DIY Interior (2ft x 5ft)

https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Finally got some semi decent pics. I have yet to tackle the doors. Been a learning process to do a good job, but not too hard.

[phatr1s]

Originally Posted by aw305

I used 3m 1080 cf for my trim

Which 3M 1080 CF number?

[YXEM5]

That looks awesome! I have thought about swapping out my Aluminum trim for the OEM CF so many times but couldn't justify the cost. Definitely going to do this!

[d_v_o_1]

Originally Posted by spike5150

Finally got some semi decent pics. I have yet to tackle the doors. Been a learning process to do a good job, but not too hard.

You did a nice job, looks great - no fingering or anything around your corners

[gqt5013]

Originally Posted by spike5150

Finally got some semi decent pics. I have yet to tackle the doors. Been a learning process to do a good job, but not too hard.

Looks good! I am waiting to tackle it once I get the leather knee pads I ordered for the center console trim. I ended up picking the 5D High Gloss wrap instead of the VVIVID Epoxy High Gloss. Once I get it installed, I will post some pics.

5D High Gloss Wrap:
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

[Installsplus]

Subscribed! Really considering doing this myself. Anyone know how much film u need to tackle the job? My knee pads are replaced with the matching leather interior. So just doors and dash trim.

[d_v_o_1]

Originally Posted by Installsplus

Subscribed! Really considering doing this myself. Anyone know how much film u need to tackle the job? My knee pads are replaced with the matching leather interior. So just doors and dash trim.

Probably 72"x36" would do unless this is your first time trying to wrap. If so just add a foot 72"x48" - the longest piece is about 4'X6" so you will be covered. Cost you about $70-$100 tops

[Installsplus]

Originally Posted by d_v_o_1

Probably 72"x36" would do unless this is your first time trying to wrap. If so just add a foot 72"x48" - the longest piece is about 4'X6" so you will be covered. Cost you about $70-$100 tops

Awesome thanks. Really liking the matte finish looks more authentic. Just waiting on some more pics. Did u do yours?