02-29-2016, 03:26 PM | #1 |
Private First Class
66
Rep 106
Posts |
Installing M Performance skirt film-Easy enough?
Anyone have experience with installing this decal?
My dealer is quoting over £150 to install this for me and looking at the instructions it doesn't look too difficult. Anyone self installed and if so is it easy for a novice to carry out? Cheers. |
02-29-2016, 04:40 PM | #3 |
Lieutenant Colonel
290
Rep 1,547
Posts |
Not too difficult. The sooner you can install the better. You'll want to ensure the surface is VERY clean and free of contaminants, this will ensure that you get a good bond on the film (decal). Pick up a scraper / squidgy to help in smooth application. Most films can be installed wet to allow for movement prior to drying and removing the pre-mask. Take your time is all I will say. If not done correctly, you'll stare at the imperfections...guaranteed.
__________________
2014 BMW X5 xDrive 35d M Sport Mineral White
2011 BMW 135i M Sport Space Grey 2007 Suzuki GSX-R 750 |
Appreciate
0
|
03-01-2016, 07:45 AM | #4 |
Major General
5437
Rep 8,809
Posts |
Not very hard but not easy for someone who never worked with wrapping vinyl before. Have a heat gun ready and you would want to do this in warm weather.
Alan
__________________
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|