| 11-11-2023, 01:44 PM | #1 |
|
Private
 23
Rep 94
Posts |
Replacing a h&k amp...
Question for the experts. Let's say my old amp got damaged due to water. When I replaced the fuse on top of the amp and plugged it in the amp started smoking. So long story short I bought another used amp but before I hook it up. Is there anything I should check? I don't want to plug this one in and fry it or damage it. Or if the amp and fuse. Oth got replaced there is nothing that can damage the replacement amp?
Any help is appreciated. First time bmw owner and it's been a questionable few months lol. |
| 11-11-2023, 03:32 PM | #2 |
|
Private First Class
 
89
Rep 188
Posts
Drives: BMW X5 and BMW 7 Series
Join Date: Jun 2022
Location: Houston Texas
|
Check the fuses and look for any water and even if there isn’t any still get a towel and see if anything appears. Once it’s all dry you can plug in the new Amplifier.
__________________
Danyal.N55
|
|
Appreciate
0
|
| 11-12-2023, 01:17 PM | #3 |
|
Private
23
Rep 94
Posts |
I keep running the heat on that area every time I drive the car. Also right after it happened I had the carpet lifted with a fan blowing for a few hours. It's been a few weeks som I'm hoping all is dry. Fingers crossed
|
|
Appreciate
0
|
Post Reply |
| Bookmarks |
|
|
