BMW X5 and X6 Forum 2014-Current
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Post Reply
 
Thread Tools Search this Thread
      04-23-2016, 09:20 PM   #2333
userix
New Member
3
Rep
15
Posts

Drives: 550i
Join Date: Apr 2011
Location: la

iTrader: (0)

Quote:
Originally Posted by Almaretto View Post
For door unlock on engine off, the coding parameters are different depending on I-Step.
In newer CAF's, VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK only has option for nicht_aktiv; whereas earlier version had also had aktiv.
Check to see if you have CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING, which can be set to aktiv.

As an aside: X5 and X5M have different Launcher selection but same E-sys target.
Thanks for the reply. I have a regular X5 sdrive35i. I'll check for the other option you stated. Hopefully that will do the trick.
Appreciate 0
      04-23-2016, 09:25 PM   #2334
opasha
Brigadier General
opasha's Avatar
1318
Rep
3,990
Posts

Drives: 2014 BMW X5 50i
Join Date: Apr 2014
Location: Maryland

iTrader: (0)

Quote:
Originally Posted by userix View Post
Thanks for the reply. I have a regular X5 sdrive35i. I'll check for the other option you stated. Hopefully that will do the trick.
It will. Give the car 30 minutes after being locked for it to recognize the code, much like the ambient lighting whenever you code anything in BDC_BODY. The car needs to sit for that long after being locked to refresh the BDC_BODY ECU.
__________________
2014 X5 50i X-Line // Mineral White
Appreciate 1
      04-24-2016, 03:36 PM   #2335
userix
New Member
3
Rep
15
Posts

Drives: 550i
Join Date: Apr 2011
Location: la

iTrader: (0)

Quote:
Originally Posted by Almaretto View Post
For door unlock on engine off, the coding parameters are different depending on I-Step.
In newer CAF's, VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK only has option for nicht_aktiv; whereas earlier version had also had aktiv.
Check to see if you have CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING, which can be set to aktiv.

As an aside: X5 and X5M have different Launcher selection but same E-sys target.
Quote:
Originally Posted by opasha View Post
It will. Give the car 30 minutes after being locked for it to recognize the code, much like the ambient lighting whenever you code anything in BDC_BODY. The car needs to sit for that long after being locked to refresh the BDC_BODY ECU.
Yes, that code worked like a charm. Now, just me being nitpicky, is there a way to have all doors unlock instead of just the driver's door when engine is stopped?
Appreciate 0
      04-24-2016, 04:04 PM   #2336
dsad1
Colonel
1211
Rep
2,404
Posts

Drives: car
Join Date: Sep 2012
Location: United States

iTrader: (0)

Quote:
Originally Posted by leo95se View Post
For anyone who hasn't done the auto sport transmission- totally worth it. Much smoother. Cleaner shifts and doesn't downshift as much giving you a smoother ride in traffic as well.

I haven't played with the sport+ setting yet to see if removing the paddles will prevent limp mode so am curious if anyone else tried. Thx!
How long have you been running the car in auto sport mode? Haven't been able to do a long consecutive test, since it's my wife's car.
Appreciate 0
      04-24-2016, 06:02 PM   #2337
leo95se
Captain
United_States
126
Rep
938
Posts

Drives: '09 e92 M3, '15 F15 X5d
Join Date: May 2009
Location: CT

iTrader: (3)

A couple of weeks. Nothing huge it just smooths things out. Don't get why this isn't an OEM option.
Appreciate 0
      04-25-2016, 12:25 AM   #2338
opasha
Brigadier General
opasha's Avatar
1318
Rep
3,990
Posts

Drives: 2014 BMW X5 50i
Join Date: Apr 2014
Location: Maryland

iTrader: (0)

Quote:
Originally Posted by userix View Post
Yes, that code worked like a charm. Now, just me being nitpicky, is there a way to have all doors unlock instead of just the driver's door when engine is stopped?
In your iDrive in SETTINGS>KEY/TAILGATE, do you have unlock set to driver door or all doors? If you set it to all doors, it might do it. I have this coded on my loaner and it works for me - all doors become unlocked when parked after setting this option for all doors.

BTW, in the ambient lighting settings, after coding it for atomic80, I figured out how to basically use almost all the colors. Aside from BLUE, ORANGE, and WHITE, you have the COMBINATION of these three colors below these three in that list. Those are numbered AMBIENTE_FARBE_ENSEMBLE_4,5,6,7....and so on. If you simply change the colors for these, you will be having the new colors as well. Just throwing it out there in case anyone is a fan of one color for all three layers like me. Mine is currently all RED with my 6WB in sport mode, so it looks very much like a star wars (sith) interior. Obviously, the names will remain the same: BLUE, ORANGE, WHITE, ORANGE/WHITE/ORANGE, BLUE/WHITE/BLUE etc - but they will have those new colors if you set them in the first three layers.

I read PlayTookies' thread, but wasn't sure if anyone thought about what I mentioned, so I'm just repeating that it is possible to have more than 3 colors if you want.
__________________
2014 X5 50i X-Line // Mineral White

Last edited by opasha; 04-25-2016 at 12:38 AM..
Appreciate 0
      04-25-2016, 04:22 PM   #2339
tonyctl
Registered
Canada
5
Rep
3
Posts

Drives: 2015 F15 X5 35d M-Sport
Join Date: Dec 2015
Location: Vancouver

iTrader: (0)

Ok, so I've been really puzzled why my Easy Entry only tilts my steering wheel up but doesn't move my seat backwards when I exit my truck, so I did some looking around on other F series forums and managed to code this feature into my '15 X5d. Now my seats move back 6cm when I exit my vehicle (this can be adjusted). I don't remember seeing this in the cheatsheet, so going to share it with everyone on here:

SM2 [6d] > 30000 SM_GLOBAL, 06 > Funktionen > EINAUSSTIEGSHILFE > Ausgelesen Change value to Modus_FA_SLV (This enables the feature)

SM2 [6d] > 3012 EAH, 0A > Funktionen > EAH_VERFAHRWEG_SLV_PHYS > Ausgelesen
default: 00, 3C (This sets the distance you want the seat to move back when you exit vehicle. Default 00, 3C is 60mm, you can change this to any value you want, eg 00, 28 for 40mm)
Appreciate 2
iconoclast7257.50
      04-26-2016, 10:41 AM   #2340
Maxipes
Private
Maxipes's Avatar
United_States
23
Rep
75
Posts

Drives: 2017 X5 e40
Join Date: Oct 2014
Location: Northern New Jersey

iTrader: (0)

Quote:
Originally Posted by opasha View Post
In your iDrive in SETTINGS>KEY/TAILGATE, do you have unlock set to driver door or all doors? If you set it to all doors, it might do it. I have this coded on my loaner and it works for me - all doors become unlocked when parked after setting this option for all doors.

BTW, in the ambient lighting settings, after coding it for atomic80, I figured out how to basically use almost all the colors. Aside from BLUE, ORANGE, and WHITE, you have the COMBINATION of these three colors below these three in that list. Those are numbered AMBIENTE_FARBE_ENSEMBLE_4,5,6,7....and so on. If you simply change the colors for these, you will be having the new colors as well. Just throwing it out there in case anyone is a fan of one color for all three layers like me. Mine is currently all RED with my 6WB in sport mode, so it looks very much like a star wars (sith) interior. Obviously, the names will remain the same: BLUE, ORANGE, WHITE, ORANGE/WHITE/ORANGE, BLUE/WHITE/BLUE etc - but they will have those new colors if you set them in the first three layers.

I read PlayTookies' thread, but wasn't sure if anyone thought about what I mentioned, so I'm just repeating that it is possible to have more than 3 colors if you want.
I figured that coding in GROUP_0_FARBE_ENSEMBLE_1(2,3,4,5,6,7,8) colors which could be orange or white is not changing anything. Am I wrong? Also Opasha, how many layers of ambient light on doors? Two?
Thanks
Appreciate 0
      04-26-2016, 02:40 PM   #2341
opasha
Brigadier General
opasha's Avatar
1318
Rep
3,990
Posts

Drives: 2014 BMW X5 50i
Join Date: Apr 2014
Location: Maryland

iTrader: (0)

Quote:
Originally Posted by Maxipes View Post
I figured that coding in GROUP_0_FARBE_ENSEMBLE_1(2,3,4,5,6,7,8) colors which could be orange or white is not changing anything. Am I wrong? Also Opasha, how many layers of ambient light on doors? Two?
Thanks
No, you are correct. That particular code is for the dome lights, and they do not have any other color other than Orange and White...just like the tiny lights behind the driver and passenger rear seats. The doors have three layers. It's in the cheat sheet. The top long bar, the middle small bar, and the cup holder/side pocket door bar.
__________________
2014 X5 50i X-Line // Mineral White
Appreciate 1
      04-27-2016, 04:46 AM   #2342
atomic80
Lieutenant
404
Rep
561
Posts

Drives: 997TT
Join Date: Jan 2008
Location: Bellevue, WA

iTrader: (0)

Quote:
Originally Posted by opasha View Post
BTW, in the ambient lighting settings, after coding it for atomic80
Yes...it now looks awesome at night! Barely visible during the day though.
BMW X5 interior at night by Jason Tang, on Flickr
Appreciate 3
      04-28-2016, 07:57 AM   #2343
Maxipes
Private
Maxipes's Avatar
United_States
23
Rep
75
Posts

Drives: 2017 X5 e40
Join Date: Oct 2014
Location: Northern New Jersey

iTrader: (0)

Quote:
Originally Posted by opasha View Post
No, you are correct. That particular code is for the dome lights, and they do not have any other color other than Orange and White...just like the tiny lights behind the driver and passenger rear seats. The doors have three layers. It's in the cheat sheet. The top long bar, the middle small bar, and the cup holder/side pocket door bar.
So all three door layers going to be the same color after coding. Right?
Appreciate 0
      04-28-2016, 11:49 AM   #2344
leo95se
Captain
United_States
126
Rep
938
Posts

Drives: '09 e92 M3, '15 F15 X5d
Join Date: May 2009
Location: CT

iTrader: (3)

Not if you set them differently. Layer1. Layer2. Layer3.
Appreciate 1
      04-28-2016, 11:59 AM   #2345
aman27
Lieutenant
71
Rep
429
Posts

Drives: 2016 F15 x35i MSport
Join Date: Aug 2010
Location: Long Island, NY

iTrader: (0)

Anyone in the NY/Long Island area that could do some coding for me ?
Appreciate 0
      04-28-2016, 02:27 PM   #2346
iconoclast
Self-Deprecating Narcissist
iconoclast's Avatar
No_Country
7258
Rep
6,561
Posts

Drives: Audi BMW Ferrari LR MB
Join Date: Jan 2014
Location: In, Out & Around...

iTrader: (1)

yes.. contact my buddy Okee:

http://www.codemycar.com/
Appreciate 0
      04-28-2016, 07:01 PM   #2347
opasha
Brigadier General
opasha's Avatar
1318
Rep
3,990
Posts

Drives: 2014 BMW X5 50i
Join Date: Apr 2014
Location: Maryland

iTrader: (0)

Quote:
Originally Posted by Maxipes View Post
So all three door layers going to be the same color after coding. Right?
Quote:
Originally Posted by leo95se View Post
Not if you set them differently. Layer1. Layer2. Layer3.
As leo95se said, there are 3 layers. If you want them all to be red, you pick hellrot (bright red) for all three. If you want to mix it up, you mix it up. It's all your preference, Maxipes.
__________________
2014 X5 50i X-Line // Mineral White
Appreciate 1
      04-29-2016, 12:24 AM   #2348
MilehighM3
Brigadier General
MilehighM3's Avatar
United_States
910
Rep
3,452
Posts

Drives: Harrop E90 M3
Join Date: May 2011
Location: Colorado Springs

iTrader: (14)

Garage List
2009 E90 M3  [6.50]
Has anyone coded out the seat occupancy recognition on a F2x/3x? If so, tips are welcome. It doesn't seem that it's possible like the E series vehicles. TIA
Appreciate 0
      04-29-2016, 08:17 PM   #2349
Stinkyxy
Lieutenant
152
Rep
458
Posts

Drives: X5
Join Date: Nov 2015
Location: Toronto

iTrader: (0)

Can someone pm me the latest software. Lost it with a new computer.
Thanks.
Appreciate 0
      05-01-2016, 02:26 AM   #2350
skalberti
Major
skalberti's Avatar
United_States
613
Rep
1,133
Posts

Drives: 2017 Mineral White M3
Join Date: Dec 2009
Location: Texas

iTrader: (0)

Got our X5 back from service last week, they did the dreaded software flash. Used E-SYS 3.27.1 and 58.3 PSDZdata. All coded well except for BDC BODY and one of the SM2's are both still trimmed. I was able to code the second SM2 based on the wert values. BDC BODY no such luck. What am I missing?
Appreciate 0
      05-01-2016, 09:01 AM   #2351
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by skalberti View Post
Got our X5 back from service last week, they did the dreaded software flash. Used E-SYS 3.27.1 and 58.3 PSDZdata. All coded well except for BDC BODY and one of the SM2's are both still trimmed. I was able to code the second SM2 based on the wert values. BDC BODY no such luck. What am I missing?
You must update. I replied to your PM.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      05-01-2016, 09:04 AM   #2352
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by Stinkyxy View Post
Can someone pm me the latest software. Lost it with a new computer.
Thanks.
PM sent.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE
Appreciate 0
      05-01-2016, 09:49 AM   #2353
leo95se
Captain
United_States
126
Rep
938
Posts

Drives: '09 e92 M3, '15 F15 X5d
Join Date: May 2009
Location: CT

iTrader: (3)

How come we can't post a link to the site that always has the latest software, vs shawnsheridan needing to pm? Is it a software thing?
Appreciate 0
      05-01-2016, 09:55 AM   #2354
shawnsheridan
General
shawnsheridan's Avatar
United_States
10340
Rep
40,310
Posts

Drives: 2018 Alpina B6 650ix GC
Join Date: Feb 2010
Location: Houston, TX

iTrader: (0)

Garage List
Quote:
Originally Posted by leo95se View Post
How come we can't post a link to the site that always has the latest software, vs shawnsheridan needing to pm? Is it a software thing?
You will need to ask Forum Administration. But considering BMW took down several forums a few years ago for software links, I don't think Forum will change it's rules.
__________________

2018 F06 Alpina B6 650ix GC; Space Grey; Vermillion Red Nappa Leather; Executive; B&O; Driving Assistant
2017 F15 X5 xDrive50i MSport; Glacier Silver Metallic; Black Dakota Leather; Executive; B&O; Driving Assistant; RSE

Last edited by shawnsheridan; 05-01-2016 at 10:06 AM..
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 06:01 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST