BMW X5 and X6 Forum 2014-Current
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read


Post Reply
 
Thread Tools Search this Thread
      01-24-2024, 08:33 AM   #1
ernicito
Registered
0
Rep
3
Posts

Drives: BMW X5 (F15)
Join Date: Jan 2024
Location: UK

iTrader: (0)

FZD, E-SYS questions

Hello im newbie in this, watched some videos, but can't find explanation for my questions.

I have BMW F15 X5 2017 RHD, from TargetProject I have 4 opinions for F025
One is : F025-22-11-510 and another is I think F025-22-07-540 (about this one not fully sure didin't make screenshot.) But when I connect using F025-22-11-510 above on the KIS/SVT Target it shows "I-Step (shipm.): F025-16-11-503"

1. So first question would be what means those F025-xx-xx-xx, is it newer version is it production date? If I select then 22-11-510 is it wrong selection?

2. What means where TargetProject= at the end with same versions theres _DIRECT?

3. Into my FZD water came from sunroof and damaged connection with passenger airbag, I swaped to used one and now sunroof can't be programed by holding button and theres a faults that the FZD: No current coding data stored, FZD: Control unit is not encoded for the vehicle, and plenty of other related with sunroof. So what procedure should I use to code it? I have the old one should I connect that scan save CAFD file or something? Because when I connect via ESYS and go to the FZD, I don't see the CAFD file in that used one which is now connected.

I will be very thankful for the answers.
Appreciate 0
      01-24-2024, 11:37 AM   #2
RED_Y_
Colonel
United_States
1047
Rep
2,494
Posts

Drives: 2014 X5 3.5d
Join Date: Sep 2017
Location: SF Bay Area

iTrader: (0)

Please check this thread out, first post even got the video about basic coding:
https://f15.bimmerpost.com/forums/sh....php?t=1033991
1.Just difference between the FW version of your car and firmware released.
2. Do no use direct connection.
3. Should be along the line of Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE. But I am not 100% sure if FZD is codable, you should ask in the coding thread.
Appreciate 0
      01-24-2024, 12:26 PM   #3
ernicito
Registered
0
Rep
3
Posts

Drives: BMW X5 (F15)
Join Date: Jan 2024
Location: UK

iTrader: (0)

Quote:
Originally Posted by RED_Y_ View Post
Please check this thread out, first post even got the video about basic coding:
https://f15.bimmerpost.com/forums/sh....php?t=1033991
1.Just difference between the FW version of your car and firmware released.
2. Do no use direct connection.
3. Should be along the line of Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE. But I am not 100% sure if FZD is codable, you should ask in the coding thread.
Thanks for your reply.

I did check that thread, sadly only one video is available.

Really appreciate for writing procedure.
Appreciate 0
      01-24-2024, 02:48 PM   #4
ernicito
Registered
0
Rep
3
Posts

Drives: BMW X5 (F15)
Join Date: Jan 2024
Location: UK

iTrader: (0)

Quote:
Originally Posted by RED_Y_ View Post
Please check this thread out, first post even got the video about basic coding:
https://f15.bimmerpost.com/forums/sh....php?t=1033991
1.Just difference between the FW version of your car and firmware released.
2. Do no use direct connection.
3. Should be along the line of Connect => Read FA (VO) => Activate FA (VO) => Read SVT (VCM) => Left-Click on desired ECU => Click on "Detect CAF for SWE" => Select the CAFD from latest I-Level shown => Select OK => Right-Click on ECU (the ECU itself not the underlying CAFD) => Select CODE. But I am not 100% sure if FZD is codable, you should ask in the coding thread.
Tried doing as you said got error :
job failed with negative response error:
code : coding signature not correct
description: no detailed description available; LinkName: FZD_56_ETHERNET
severity: ERROR


is it because the used FZD not flashed?
Appreciate 0
      01-24-2024, 06:53 PM   #5
RED_Y_
Colonel
United_States
1047
Rep
2,494
Posts

Drives: 2014 X5 3.5d
Join Date: Sep 2017
Location: SF Bay Area

iTrader: (0)

I am not that much of an expert, may be shawnsheridan can help here.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 05:34 AM.




xbimmers
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST