BMW Coding Thread

Zigor911 · 10-22-2017, 08:15 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Zigor911

See screen shots

HKFM2 with CAFD_00005710 and CAFD_0000570E are both unmapped. Though, position of codes has not moved so you can use CAFD_00002098 or Launcher Cheat Codes as reference.

Quote:

Originally Posted by Vlado

2017 x5 here ...e-sys

so far no DVDIM after 39MPH
trunk cant close with remote
no fog ( corner) lights on with low beam lights ( respect to all but please dont comment or judge,if you dont know how to fix )
Vmax= 135mph.....anyone know how to fix them via e-sys yet .. i had tried VMAX to 250kmh but still locked on 135mph...

Tried but didn't work turn signal x 5

No free publicly available solution. There are commercial options.

If coded correctly it will.

That should be on from factory.

Vmax can only be changed within 10 operating hours.

For turn signal, there are two functions. You should use newer one with your firmware.

Thank you for response! How can I use different file?

Almaretto · 10-22-2017, 10:18 AM

Quote:

Originally Posted by Zigor911

Thank you for response! How can I use different file?

Side by side comparison. Functions are in the same place. Use NCD/CAFD Tool to open CAFD while unmapped one is in E-sys.

Zigor911 · 10-22-2017, 11:09 AM

Quote:

Originally Posted by Almaretto

Quote:

Originally Posted by Zigor911

Thank you for response! How can I use different file?

Side by side comparison. Functions are in the same place. Use NCD/CAFD Tool to open CAFD while unmapped one is in E-sys.

And use that to code FDL in car? Sorry, have not done it before - that's why so many questions. Is there a guide that describes specifically this approach? Thanks!

Almaretto · 10-22-2017, 01:13 PM

Quote:

Originally Posted by Zigor911

And use that to code FDL in car? Sorry, have not done it before - that's why so many questions. Is there a guide that describes specifically this approach? Thanks!

Try 300B_1_1_255 and 3008_1_1_255 to werte 05

No Guide. Just look at storage info and sections.

ddavtian · 10-22-2017, 01:52 PM

Quote:

Originally Posted by ddavtian

May I get a link to latest software? I used this guide to code 2015 X6. Now I have 2017 X6M, can I use software and guide the same way?

Thank you in advance!

Hi guys. Noob question. I asked for a link, was not patient, tried to use software that I got from Shaun last year. I used "F16" during token generation. Later within E-sys I selected F25, according to instructions from first page. When I read ECU, I don't get HU_NBT folder. I have HU_NBT2, when I tried to read it, I got an error message. Search told me I needed new version of PSdZData, I'll wait for a link.
Will that also help me to get HU_NBT folder? That's where I want to make few changes. Am I doing something wrong?

Thank you!

shawnsheridan · 10-22-2017, 02:01 PM

Quote:

Originally Posted by ddavtian

Hi guys. Noob question. I asked for a link, was not patient, tried to use software that I got from Shaun last year. I used "F16" during token generation. Later within E-sys I selected F25, according to instructions from first page. When I read ECU, I don't get HU_NBT folder. I have HU_NBT2, when I tried to read it, I got an error message. Search told me I needed new version of PSdZData, I'll wait for a link.
Will that also help me to get HU_NBT folder? That's where I want to make few changes. Am I doing something wrong?

Thank you!

PM sent.

For X6, you should be using:

E-Sys Launcher Car Series = F016
E-Sys Connection Target = F205

ddavtian · 10-22-2017, 06:59 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

For X6, you should be using:

E-Sys Launcher Car Series = F016
E-Sys Connection Target = F205

Thank you Shawn.
Worked with Shawn through PM, thank you!

shawnsheridan · 10-22-2017, 07:31 PM

Quote:

Originally Posted by ddavtian

Thank you Shawn.
Worked with Shawn through PM, thank you!

M6BMWDriver · 10-24-2017, 10:16 PM

Hi All,

I have a paid token from TM and I'm getting an invalid token when I try to launch LauncherPro now? any idea, I did email TM to see if I have to pay again since the last time I paid was October of last year. Any idea??

shall I reinstall LauncherPro?

delviacv2 · 10-25-2017, 03:49 AM

Quote:

Originally Posted by M6BMWDriver

Hi All,

I have a paid token from TM and I'm getting an invalid token when I try to launch LauncherPro now? any idea, I did email TM to see if I have to pay again since the last time I paid was October of last year. Any idea??

shall I reinstall LauncherPro?

You have to do the process every year.

Almaretto · 10-25-2017, 09:23 AM

Quote:

Originally Posted by M6BMWDriver

Hi All,

I have a paid token from TM and I'm getting an invalid token when I try to launch LauncherPro now? any idea, I did email TM to see if I have to pay again since the last time I paid was October of last year. Any idea??

shall I reinstall LauncherPro?

Did you update Launcher? Recent releases have been giving "invalid token" errors. See blog.

No, you do not pay each year.

candm · 10-25-2017, 11:39 AM

shawnsheridan or Almaretto
2016 X5 40e
Can you please send the latest software (or links) required for coding?

shawnsheridan · 10-25-2017, 11:41 AM

Quote:

Originally Posted by candm

shawnsheridan or Almaretto
2016 X5 40e
Can you please send the latest software (or links) required for coding?

PM sent.

candm · 10-25-2017, 12:01 PM

Quote:

Originally Posted by shawnsheridan

PM sent.

Thanks

Katsumoto · 10-25-2017, 04:45 PM

First i want to say hi to all. After many researches i have done , can someone tell me if he resolve and remove the VMAX on 2017 ( x5 50i ) after being DME locked and past 10h... I know Dinan and some other tuners can remove it after reflash but i have racechip on it and not sure if i want to do more ecu upgrades ...so far i love the RC

Almaretto · 10-25-2017, 05:51 PM

Quote:

Originally Posted by Vlado

First i want to say hi to all. After many researches i have done , can someone tell me if he resolve and remove the VMAX on 2017 ( x5 50i ) after being DME locked and past 10h... I know Dinan and some other tuners can remove it after reflash but i have racechip on it and not sure if i want to do more ecu upgrades ...so far i love the RC

There is no publicly available free solution. Some claim they can unlock after 10h.

Dataready · 10-26-2017, 02:08 PM

Sorry guys if this is a repeated issue, but I do not seem to find the answer. I am working on the NGHB. After VO coding BDC_Body, KAFAS and FLE with the decoding symbols removed from the order. I am trying to FDL code the FLE as described in the second part of the well known PDF file. The activity text saved from the read session shows two FLE (44 and 45) files with the same 00xx-00xx numbers, but when I check the directory, I have only ONE file. I thought there should be one FLE file for each side (left and right light). Any answer??

Almaretto · 10-26-2017, 02:50 PM

Quote:

Originally Posted by Dataready

Sorry guys if this is a repeated issue, but I do not seem to find the answer. I am working on the NGHB. After VO coding BDC_Body, KAFAS and FLE with the decoding symbols removed from the order. I am trying to FDL code the FLE as described in the second part of the well known PDF file. The activity text saved from the read session shows two FLE (44 and 45) files with the same 00xx-00xx numbers, but when I check the directory, I have only ONE file. I thought there should be one FLE file for each side (left and right light). Any answer??

When "Read Coding Data," any existing file with the same name will be overwritten. Since both 45 & 44 share a name, you will only find one. Apply the same coding to driver and passenger.

gqt5013 · 10-27-2017, 07:56 PM

For some reason when I want to code my ambient lighting the "orange,white" options are not there and some weird UNK_PARAM values are there. I just got the latest psdzdata from Shawn as well. The prior version of psdzdata I had I was able to successfully code the ambient lighting. Can anyone help me?

Also, the FLE module not showing up either.

M6BMWDriver · 10-28-2017, 04:48 PM

Quote:

Originally Posted by Almaretto

Did you update Launcher? Recent releases have been giving "invalid token" errors. See blog.

No, you do not pay each year.

thank you so much, i did the update and all is good. thanks again!

M6BMWDriver · 10-28-2017, 04:56 PM

Hi All,

I know this is an F15/F16 forum, sorry for the question. For my 2016 M6 F12, windshield cracked thanks to the NYC area roads! I got the windshield replaced by the dealer and the Kafas is not working correctly "error front camera malfunction". I think they needed to initialize the Camera, but they didn't. So, i have to wait few days to bring it back to them!

I unplugged the camera then plugged it, it worked for a minute then as soon as i tried the FLA i got the error again.

is there a way to reinitialize the KAFAS camera with E-Sys?

thank you

Almaretto · 10-28-2017, 05:28 PM

Quote:

Originally Posted by M6BMWDriver

thank you so much, i did the update and all is good. thanks again!

Quote:

Originally Posted by M6BMWDriver

Hi All,

I know this is an F15/F16 forum, sorry for the question. For my 2016 M6 F12, windshield cracked thanks to the NYC area roads! I got the windshield replaced by the dealer and the Kafas is not working correctly "error front camera malfunction". I think they needed to initialize the Camera, but they didn't. So, i have to wait few days to bring it back to them!

I unplugged the camera then plugged it, it worked for a minute then as soon as i tried the FLA i got the error again.

is there a way to reinitialize the KAFAS camera with E-Sys?

thank you

Use ISTA+ to initialize.

10-24-2017, 10:16 PM	#3793
M6BMWDriver Private First Class 69 Rep 176 Posts Drives: F12 Singapore Gray M6 Conv Join Date: Sep 2016 Location: NYC iTrader: (0)	Expired Token Hi All, I have a paid token from TM and I'm getting an invalid token when I try to launch LauncherPro now? any idea, I did email TM to see if I have to pay again since the last time I paid was October of last year. Any idea?? shall I reinstall LauncherPro?
	Appreciate 0 Quote

10-25-2017, 11:39 AM	#3796
candm New Member 18 Rep 17 Posts Drives: 2016 BMW X5 xDrive40e Join Date: Apr 2017 Location: Toronto, ON Canada iTrader: (0)	shawnsheridan or Almaretto 2016 X5 40e Can you please send the latest software (or links) required for coding? __________________ 2016 F15 X5 xDrive40e Alpine/Terra 2013 E84 X1 xDrive28 Apline/Terra
	Appreciate 0 Quote

10-25-2017, 04:45 PM	#3799
Katsumoto First Lieutenant 126 Rep 303 Posts Drives: MBB F95 Comp Join Date: Aug 2015 Location: N/A iTrader: (6)	First i want to say hi to all. After many researches i have done , can someone tell me if he resolve and remove the VMAX on 2017 ( x5 50i ) after being DME locked and past 10h... I know Dinan and some other tuners can remove it after reflash but i have racechip on it and not sure if i want to do more ecu upgrades ...so far i love the RC
	Appreciate 0 Quote

10-26-2017, 02:08 PM	#3801
Dataready Private 15 Rep 83 Posts Drives: 2023 X5 Join Date: Feb 2012 Location: USA. iTrader: (0)	Repeated subject Sorry guys if this is a repeated issue, but I do not seem to find the answer. I am working on the NGHB. After VO coding BDC_Body, KAFAS and FLE with the decoding symbols removed from the order. I am trying to FDL code the FLE as described in the second part of the well known PDF file. The activity text saved from the read session shows two FLE (44 and 45) files with the same 00xx-00xx numbers, but when I check the directory, I have only ONE file. I thought there should be one FLE file for each side (left and right light). Any answer??
	Appreciate 0 Quote

10-27-2017, 07:56 PM	#3803
gqt5013 Private First Class 140 Rep 104 Posts Drives: 2017 X5 35i Msport Join Date: Jan 2014 Location: Maryland iTrader: (0)	Missing coding items For some reason when I want to code my ambient lighting the "orange,white" options are not there and some weird UNK_PARAM values are there. I just got the latest psdzdata from Shawn as well. The prior version of psdzdata I had I was able to successfully code the ambient lighting. Can anyone help me? Also, the FLE module not showing up either. Attached Images
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

10-28-2017, 04:56 PM	#3805
M6BMWDriver Private First Class 69 Rep 176 Posts Drives: F12 Singapore Gray M6 Conv Join Date: Sep 2016 Location: NYC iTrader: (0)	KAFAS issues Hi All, I know this is an F15/F16 forum, sorry for the question. For my 2016 M6 F12, windshield cracked thanks to the NYC area roads! I got the windshield replaced by the dealer and the Kafas is not working correctly "error front camera malfunction". I think they needed to initialize the Camera, but they didn't. So, i have to wait few days to bring it back to them! I unplugged the camera then plugged it, it worked for a minute then as soon as i tried the FLA i got the error again. is there a way to reinitialize the KAFAS camera with E-Sys? thank you
	Appreciate 0 Quote