BMW Coding Thread

[M6BMWDriver]

Originally Posted by Almaretto

Use ISTA+ to initialize.

Thank you

Is there a guide out there, i've never done this before I don't want to mess up.

[Almaretto]

Originally Posted by M6BMWDriver

Thank you

Is there a guide out there, i've never done this before I don't want to mess up.

No guide of which I am aware, but ISTA+ is rather straight forward. You may be able to pull up after scanning test or you may have to look for function in services.

[M6BMWDriver]

Originally Posted by Almaretto

No guide of which I am aware, but ISTA+ is rather straight forward. You may be able to pull up after scanning test or you may have to look for function in services.

Thank you

[Almaretto]

Originally Posted by M6BMWDriver

Thank you

No problem. Let me know if you have trouble locating.

[M6BMWDriver]

Originally Posted by Almaretto

No problem. Let me know if you have trouble locating.

Can you please pm ista+ please!

[Almaretto]

Originally Posted by M6BMWDriver

Can you please pm ista+ please!

PM sent

[mkdan2004]

Hi guys. Could you help me identify what must be coded to disable the easy access for the F15? Specifically, steering column adjustment. I found it for the E70, it is:
Module : IHKA
ELSV_EH_LAENGE -> aktiv -> nicht_aktiv
ELSV_EH_NEIGUNG -> aktiv -> nicht_aktiv
But this option is not there for the F15. My steering wheel got stuck recently, and i would like to disable this option.

[IG-G80]

@opasha - tried shooting you a PM but inbox is full.

I'm looking to code my f15 x5 and noticed opasha can provide the tokens that are required for the e-sys application. Can you please provide these?

I am also looking for a good source to download ESYS, psdzdata and ISTA+. Is anyone can provide that I would greatly appreciate it.

Thanks!

[Almaretto]

Originally Posted by mgluc11

@opasha - tried shooting you a PM but inbox is full.

I'm looking to code my f15 x5 and noticed opasha can provide the tokens that are required for the e-sys application. Can you please provide these?

I am also looking for a good source to download ESYS, psdzdata and ISTA+. Is anyone can provide that I would greatly appreciate it.

Thanks!

If you read OP, Opasha does not provide tokens. Launcher is self-contained program that creates and provides additional optimization.

Fxx-/Ixx-/Gxx-series Coding: (No Request) Latest Software Links

You will find Sticky to ISTA+ links over there as well. Alternatively, you can find in F30 Coding Section.

[Aptem-k]

Did anybody managed to change ambient light in a car with nbt evo. There are only 6 groups instead of 9 and color codes seems to be completely different from the one used before

[Almaretto]

Originally Posted by Aptem-k

Did anybody managed to change ambient light in a car with nbt evo. There are only 6 groups instead of 9 and color codes seems to be completely different from the one used before

It is not an evo issue, it has to do with newer firmware.

[osuedu]

Does anyone know the KOMBI codes for the Instrument Cluster Gear indicator? I seem to have lost the R N P D indicators.

Thanks

[Almaretto]

Originally Posted by osuedu

Does anyone know the KOMBI codes for the Instrument Cluster Gear indicator? I seem to have lost the R N P D indicators.

Thanks

Did you try VO coding back to factory?

[C4sF80M3]

To start, I've added the VO code of 3AC, and I followed this procedure:

"Connect => Read FA (VO) => Activate FA (VO) => Read ECU (VCM) => Left-Click on AHM ECU => Click on "Detect CAF for SWE" => Select the CAFD matching your I-Level => Select OK => Right-Click on AHM(AAG for mine) (the ECU itself not the underlying CAFD) => Select CODE. "

However, during the process I noticed that the CAFD selection did not show my Istep version.



I choose the latest version available 503, and coded that. However, the the Trailer Hitch warning message started flashing afterwards.

1) Do I need different files to fix this issue?
2) If so can someone link me the latest files I need to do this?
3) Could this be a VO coding issue? Not sure which ECU's need to be VO coded, as it seems that every other post on the question has users flashing ECU names that I do not have. For example my unit is labeled AAG not AHM.



Thanks for your help!!!

[apollo.ab]

Can anybody advise please how to change Number of Soft Turn Signal Blinks to 5? at the cheat sheet there is BDC_BODY, 3068, BLINKZYKLEN_ANZAHL_TIPP. But there is no such function in section 3068.

[Almaretto]

Originally Posted by apollo.ab

Can anybody advise please how to change Number of Soft Turn Signal Blinks to 5? at the cheat sheet there is BDC_BODY, 3068, BLINKZYKLEN_ANZAHL_TIPP. But there is no such function in section 3068.

PIA_DEFAULT_TIPPBLINKEN: 02

[Doanster]

Originally Posted by Almaretto

PIA_DEFAULT_TIPPBLINKEN: 02

And... it's in Module 3069 now for newer IStep versions.

http://f15.bimmerpost.com/forums/sho...&postcount=461

[apollo.ab]

Thanks for reply

[Almaretto]

Originally Posted by apollo.ab

Thanks for reply

[leasehackr]

Originally Posted by shawnsheridan

PM sent.

Hi Shawn,

Picked up 2018 X5 40e over the weekend. Wanted to code few things e.g. trunk close with fob, mirror close etc.

Could you pm the link to latest s/w and cheat sheets with all modules, functions and new value for F15? Found this xls on pg1 which put together by Opasha, not sure if it has been updated.

https://docs.google.com/spreadsheets...9s4/edit#gid=0


TIA!!

[shawnsheridan]

Originally Posted by Infosec

Hi Shawn,

Picked up 2018 X5 40e over the weekend. Wanted to code few things e.g. trunk close with fob, mirror close etc.

Could you pm the link to latest s/w and cheat sheets with all modules, functions and new value for F15? Found this xls on pg1 which put together by Opasha, not sure if it has been updated.

https://docs.google.com/spreadsheets...9s4/edit#gid=0

TIA!!

PM sent. Cheat Sheets are replaced now with E-Sys Launcher builtin Cheat Codes.

[mkdan2004]

Originally Posted by mkdan2004

Hi guys. Could you help me identify what must be coded to disable the easy access for the F15? Specifically, steering column adjustment. I found it for the E70, it is:
Module : IHKA
ELSV_EH_LAENGE -> aktiv -> nicht_aktiv
ELSV_EH_NEIGUNG -> aktiv -> nicht_aktiv
But this option is not there for the F15. My steering wheel got stuck recently, and i would like to disable this option.

Hi guys. It seems that i should be looking at the FEM_BODY module for coding the steering wheel. Does anyone knows what exactly should be coded to disable this "easy access"?