Removing the emblem on trunk

Killacam13 · 02-20-2018, 08:58 PM

I ordered black carbon emblems and was trying to replace. I got the front hood one replaced easily but having a hard time getting the trunk one off. Is there aan easy way to remove it? Thanks

1coolF15D2017 · 02-20-2018, 09:14 PM

Quote:

Originally Posted by Killacam13

I ordered black carbon emblems and was trying to replace. I got the front hood one replaced easily but having a hard time getting the trunk one off. Is there aan easy way to remove it? Thanks

Use a flexible plastic spreader. Like from this link. And donn't forget to put painters tape around the emblem to prevent scratching the paint.

https://www.amazon.com/dp/B0015DMGD0...a-383883421371

Maverik259 · 02-20-2018, 09:16 PM

Quote:

Originally Posted by 1coolF15D2017

Quote:

Originally Posted by Killacam13

I ordered black carbon emblems and was trying to replace. I got the front hood one replaced easily but having a hard time getting the trunk one off. Is there aan easy way to remove it? Thanks

Use a flexible plastic spreader. Like from this link.

https://www.amazon.com/dp/B0015DMGD0...a-383883421371

Yep. Autozone or similar carries this as well. Jam it up in there and gently pry off. Obviously she that tape

Killacam13 · 02-20-2018, 09:24 PM

Quote:

Originally Posted by Maverik259

Yep. Autozone or similar carries this as well. Jam it up in there and gently pry off. Obviously she that tape

Even though I'm not removing the whole roundel and taking the inside part off o should put tape around it?

HomeIn2 · 02-20-2018, 09:42 PM

Hmm...not sure what you mean by ‘black carbon emblems’ or ‘not removing the whole roundel.’ However, if you are asking about replacing the round BMW trunk emblem, a little warm up with a heat gun or hairdryer before you pry, helps release the factory 2-sided tape.

IndyJer · 02-20-2018, 09:50 PM

Quote:

Originally Posted by Killacam13

Even though I'm not removing the whole roundel and taking the inside part off o should put tape around it?

The rear rounder is all one piece, you can’t remove just the center part. It’s a different part than the front hood roundel. It’s held on with double sided tape

Killacam13 · 02-20-2018, 09:54 PM

Quote:

Originally Posted by IndyJer

The rear rounder is all one piece, you can’t remove just the center part. It’s a different part than the front hood roundel. It’s held on with double sided tape

Oh, I didn't know. I bought this thinking I can replace.

IndyJer · 02-20-2018, 09:57 PM

Yea different for the rear. You could make a necklace out of the spare or better yet buy another bimmer to stick it on.

atomic80 · 02-21-2018, 12:30 AM

The rear was a bitch to take off...it's mainly because of the adhesive that's behind there. I used fishing line first to pry those off before using the trim removal tool to get it off! I did put blue tape around after using the fishing line.

Doanster · 02-21-2018, 12:57 AM

Here you go,OP.
http://f15.bimmerpost.com/forums/sho....php?t=1112728

Killacam13 · 03-05-2018, 11:31 PM

Just went with the blacked out front and back from Ind, it was very easy to remove the back roundel. Thanks!!

IndyJer · 03-06-2018, 06:56 PM

Quote:

Originally Posted by Killacam13

Just went with the blacked out front and back from Ind, it was very easy to remove the back roundel. Thanks!!

Looks great! Now you need the blacked out X5 emblem on the back, or de-badge it, to complete the look.

02-20-2018, 08:58 PM	#1
Killacam13 Enlisted Member 78 Rep 46 Posts Drives: 2018 X5 sdrive 35i Join Date: Jan 2018 Location: Georgia iTrader: (0)	Removing the emblem on trunk I ordered black carbon emblems and was trying to replace. I got the front hood one replaced easily but having a hard time getting the trunk one off. Is there aan easy way to remove it? Thanks
	Appreciate 0 Tweet Quote

02-20-2018, 09:42 PM	#5
HomeIn2 First Lieutenant 326 Rep 303 Posts Drives: 2020 X5 M50i Join Date: Dec 2016 Location: So. CA iTrader: (1)	Hmm...not sure what you mean by ‘black carbon emblems’ or ‘not removing the whole roundel.’ However, if you are asking about replacing the round BMW trunk emblem, a little warm up with a heat gun or hairdryer before you pry, helps release the factory 2-sided tape.
	Appreciate 1 Killacam1378.00 Quote

02-20-2018, 09:57 PM	#8
IndyJer Second Lieutenant 111 Rep 256 Posts Drives: '17 F15 MSport Join Date: Aug 2015 Location: Indianapolis iTrader: (0) Garage List '16 F15 XLine [0.00] '17 F15 MSport [0.00]	Yea different for the rear. You could make a necklace out of the spare or better yet buy another bimmer to stick it on.
	Appreciate 0 Quote

02-21-2018, 12:30 AM	#9
atomic80 Lieutenant 404 Rep 561 Posts Drives: 997TT Join Date: Jan 2008 Location: Bellevue, WA iTrader: (0)	The rear was a bitch to take off...it's mainly because of the adhesive that's behind there. I used fishing line first to pry those off before using the trim removal tool to get it off! I did put blue tape around after using the fishing line.
	Appreciate 0 Quote

02-21-2018, 12:57 AM	#10
Doanster Major 627 Rep 1,181 Posts Drives: 2014 F15 Carbon Black M-Sport Join Date: Aug 2009 Location: Oregon iTrader: (0)	Here you go,OP. http://f15.bimmerpost.com/forums/sho....php?t=1112728 __________________ A little mod here, a little mod there...
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
Removing the emblem on trunk

03-05-2018, 11:31 PM	#11
Killacam13 Enlisted Member 78 Rep 46 Posts Drives: 2018 X5 sdrive 35i Join Date: Jan 2018 Location: Georgia iTrader: (0)	Just went with the blacked out front and back from Ind, it was very easy to remove the back roundel. Thanks!! Attached Images
	Appreciate 1 IND-Distribution9571.00 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search