09-23-2017, 06:37 PM | #397 |
2020 Mineral White 30d MSport
523
Rep 2,146
Posts
Drives: 2020 Mineral White 30d MSport
Join Date: Nov 2008
Location: San Jose
|
You are right to wait until 11.1 is out there
|
Appreciate
0
|
09-23-2017, 11:58 PM | #398 |
Brigadier General
565
Rep 3,742
Posts |
I am having issues coding mirror open/close via the key. I purposely did not equip the vehicle with comfort access. I have had comfort access on previous BMWs as well as on Toyota vehicles and it is pointless to me. Nevertheless, I would like to be able to pull in the mirrors and extract them via the key.
Anyone without comfort access that has coded this please advise. Thank you Last edited by SCA; 09-24-2017 at 03:38 AM.. |
Appreciate
0
|
09-24-2017, 11:51 AM | #399 |
2020 Mineral White 30d MSport
523
Rep 2,146
Posts
Drives: 2020 Mineral White 30d MSport
Join Date: Nov 2008
Location: San Jose
|
Solved my issue with Bimmercode, it was just a matter of cliking on "Restore purchases" and coding was unlock again
__________________
....Life is too short to drive boring cars
|
Appreciate
0
|
09-26-2017, 01:25 PM | #400 |
Enlisted Member
13
Rep 33
Posts |
Apologies for late response as well as incorrect info, I misread your question and so please disregard my statement that I was able to code this feature.
I am still missing ability to code wing mirror folding, totally absent from my options, seems like there are some updates missing. I have since coded this by digging out my old windows machine and cable, so for me this app purchase and the adaptor has been a write off. |
Appreciate
0
|
09-26-2017, 01:26 PM | #401 | |
Enlisted Member
13
Rep 33
Posts |
Quote:
|
|
Appreciate
0
|
09-26-2017, 01:56 PM | #402 | |
Brigadier General
565
Rep 3,742
Posts |
Quote:
The only exterior mirror option available for me is to code fold and unfold via comfort access. |
|
Appreciate
0
|
09-28-2017, 10:22 AM | #405 | |
Enlisted Member
13
Rep 33
Posts |
Quote:
Update: the App refresh has now added (for me) the Mirrors section - moot as I coded via Esys. but in case anyone else had some issue. Last edited by Pkitch; 09-28-2017 at 01:15 PM.. |
|
Appreciate
0
|
09-28-2017, 10:23 AM | #406 |
Enlisted Member
13
Rep 33
Posts |
Yes this is what I was looking to restore (after dealer recall and ECU flash), I had previously coded with ESYS and was hoping to cut some corners. Anyway per your other post, I will see if the App update has corrected this, will be nice if I need to make any future changes.
|
Appreciate
0
|
09-28-2017, 01:14 PM | #408 |
Enlisted Member
13
Rep 33
Posts |
|
Appreciate
0
|
09-28-2017, 01:19 PM | #409 |
Captain
490
Rep 661
Posts |
Thanks!
__________________
Ordered 2018 M3 SO/SS extended, ZCP w/ black 666M, DCT, Exec
|
Appreciate
0
|
09-28-2017, 03:50 PM | #410 |
Major General
1103
Rep 7,063
Posts |
Worked for me this morning!
__________________
E90 Build Thread (SOLD) http://www.e90post.com/forums/showthread.php?t=809436
F15 Build Thread (SOLD) http://f15.bimmerpost.com/forums/sho....php?t=1064084 |
Appreciate
0
|
09-28-2017, 03:51 PM | #411 |
Major General
1103
Rep 7,063
Posts |
So got everything I wanted coded. Only issue I ran into is when closing the trunk with the remote it used to be press to open and press to close. Now when I coded it, I have to keep pressing to close. Opens fine with button press
Also received these malfunctions which made my heart drop. Turned off the X5, unplugged V-link, walked out, locked it and turned it back on and it was all gone like that. All coding still in tact. I do wish however there was a favorites menu check list to do it all at once so I do not have to keep going through all option menus.
__________________
E90 Build Thread (SOLD) http://www.e90post.com/forums/showthread.php?t=809436
F15 Build Thread (SOLD) http://f15.bimmerpost.com/forums/sho....php?t=1064084 |
Appreciate
0
|
09-29-2017, 08:26 AM | #412 |
Major General
4140
Rep 7,160
Posts
Drives: F90 M5 / F15 50i
Join Date: Jun 2017
Location: Virginia
|
Errors are common
__________________
'07 Yamaha R1 (sold)
'06 C55 AMG (sold) ‘?20 M5, MP Carbon Pro Spoiler, MP Carbon Diffuser, MP Black grille and gills, MP Carbon Mirrors, CF side sills, 789M w/ Ti studs, eventuri, Dinan X pipe '14 X5 50i (wife’s now) |
Appreciate
0
|
09-30-2017, 02:47 PM | #414 |
Captain
149
Rep 666
Posts |
I just completed my coding this morning. When I was finished, my engine light was on and I had lost my door chime.
I restored everything from backup -- restoring BDC made the engine light go off. I restored the others I touched too. I still don't have my door chime back though. Any ideas? When I coded with my laptop before they installed MPPK, I had deactivated the camera and seatbelt warnings, but I still had a door chime. That's what I want now too. However, what I have now is stupid BMW default + no door chime!! What? ======= Edit: I reprogrammed this afternoon and I did BDC last instead of first. I was not left with an engine light this time. However, still no door chime. Also, I set turn signals to 5 and the setting doesn't stick. The app still says 5, but the car is only doing 3. I went into expert mode to check on the actual setting and couldn't find it: BDC_BODY/3068/BLINKZYKLEN_ANZAHL_TIPP. ======= ok, just found out that the code may be PIA_DEFAULT_TIPPBLINKEN. I'll check that later. Last edited by Barbja; 09-30-2017 at 04:08 PM.. |
Appreciate
1
OFFWHITEX5325.50 |
09-30-2017, 09:22 PM | #415 |
Private First Class
326
Rep 152
Posts |
Got It Working And Coded
Ok so I tried it again today and it updated. I coded my mirrors, angels with fog lights and tailgate closing with key fob. Thanks to all the wonderful people putting the DIY info up here. I coded it the simple way with the VGate Wi-Fi OBD2 and the Bimmercode App. So easy a caveman can do it, should've been the slogan. lol
__________________
2ND X5 IN 6 MONTHS. LET THE MODS BEGIN AGAIN.
|
Appreciate
0
|
09-30-2017, 09:25 PM | #416 | |
Captain
149
Rep 666
Posts |
Quote:
'unlock on engine stop' isn't taking effect either. I looked for VAM_UNLOCK_KL15OFF_AFTER_PIA_AUTO_LOCK in expert mode and didn't find it. I haven't checked for CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING yet. |
|
Appreciate
0
|
09-30-2017, 10:22 PM | #417 | |
Captain
149
Rep 666
Posts |
Quote:
I also found CLI_DEFAULT_UNLOCK_AFTER_END_OF_DRIVING. Its set to active though. Hmmm |
|
Appreciate
0
|
10-02-2017, 09:04 AM | #418 |
Private First Class
43
Rep 113
Posts |
Go to expert mode and change the werte value to 04 or enter a new value. It will work if you have the older iStep version. It did not work for me using BimmerApp, I have to use E-sys.
Last edited by 1coolF15D2017; 10-02-2017 at 09:20 AM.. |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|