Anti-dazzle/GFHB (really) solved

[MattBianco]

This comes courtesy of 2014F15, but on the bimmerfest site. Numerous value changes in VO codes to ECE standard from US, and reporting perfect execution. I apologize in advance if his PDF is already in the coding thread (which is huge). I also added it to the end of the long thread on anti-dazzle.

How to Guide for Glare Free High Beam: http://f15.bimmerpost.com/forums/sho...&postcount=107

From: http://f15.bimmerpost.com/forums/sho...6&postcount=64

[MrTookies]

Originally Posted by MattBianco

This comes courtesy , but on the bimmerfest site. Numerous value changes in VO codes to ECE standard from US, and reporting perfect execution. I apologize in advance if his PDF is already in the coding thread (which is huge). I also added it to the end of the long thread of anti-dazzle.

How to Guide for Glare Free High Beam: Attachment 1334466

Thanks for sharing all though the guy that wrote it has already posted this here http://f15.bimmerpost.com/forums/sho...1110249&page=3 POST #64

[dmnc02]

BTW, this is all that 2014F15 (who was one of the early testers of the coding on his car) actually posted here:

Originally Posted by 2014_F15

Check out this thread over at Bimmerfest. http://www.bimmerfest.com/forums/sho...d.php?t=660719

As PlayTookies mentioned (and had told the OP in a previous post), I had already posted the PDF in the other thread he mentioned (at the same time I posted it on the other forum) and I will be posting all additional updates in that thread.

[m_alnimah]

Quick Question for all the Folks in the US..


Anti-Dazzle is the feature where The Left Headlight goes all the way to the left and half of it shuts off (like photo that follows) or is it another feature? Do you have the feature i just mentioned even with AntiDazzle Coded Off?

[alphaod]

Yeah, I've seen that. It was weird at first because I was seeing the front and right side all lit up, but the left side had this hard cut-off.

[MrTookies]

Originally Posted by alphaod

Yeah, I've seen that. It was weird at first because I was seeing the front and right side all lit up, but the left side had this hard cut-off.

If you have the new FLE ECU's and followed the directions you won't see that all 4 lights will look the same. (When Parked).

[alphaod]

I have the pre-FLE ECU. I see the driver's side outer low beam does not have the hump as a result of half of it shut off like the picture above.

I followed all the instructions to the letter and it looks just like that. If I turn on the high beam (especially against a wall), I can see the lights swing back towards the middle.

[dmnc02]

Folks, please note that the PDF in the OP is outdated and is superseded by the new version posted in the thread mentioned in post #3.

MattBianco, please remove the PDF from the OP and avoid duplicating what is posted in the other thread to avoid confusion.

[MattBianco]

Originally Posted by dmnc02

Folks, please note that the PDF in the OP is outdated and is superseded by the new version posted in the thread mentioned in post #3.

MattBianco, please remove the PDF from the OP and avoid duplicating what is posted in the other thread to avoid confusion.

Done. Replaced by a link to the thread mentioned (post #64 content), in post #3 above.

[dmnc02]

Originally Posted by MattBianco

Done. Replaced by post #64 content (linked) in post #3 above.

Appreciated. Thank you