BMW Coding Thread

cpd1 · 01-06-2015, 02:40 PM

Revisiting the Kombi display with X5 M50d. I didn't have any other option than BMW/MPM. Suspect i need a software update for the Kombi.
What production date do you guys have so you could enable it?
pit from sssmokie's thread
Name: Dash.jpg
Views: 2627
Size: 73.2 KB

Name: Dash.jpg
Views: 2627
Size: 73.2 KB

I came across the below thread, and seemingly a Kombi flash update sorted it. Don't think I am brave enough to risk doing it myself so will get it done at the dealer next time the car is there.
http://www.bimmerfest.com/forums/sho...ight=kombi+mpm

igorsvrub · 01-06-2015, 08:22 PM

Still did not get what exactly can be done with panel, can somebody please post pictures with panel before and after coding?

CC23 · 01-06-2015, 08:50 PM

I want to say many thanks for OPASHA's help with coding. He takes a lot of his time helping those who take a leap into the coding world.

hyde · 01-07-2015, 12:31 AM

Hi opasha
Does coding also reset the learned driving habits? Just curious.. When it resets on-board info, does it also reset acceleration/transmission training that it learned over driving period?

opasha · 01-07-2015, 12:40 AM

Quote:

Originally Posted by hyde

Hi opasha
Does coding also reset the learned driving habits? Just curious.. When it resets on-board info, does it also reset acceleration/transmission training that it learned over driving period?

To the best of my knowledge, no, unless it's something related to DME (engine). However, I did find something on resetting driving habits in an e70 x5/x5m forum:
"1. Key in slot, do not touch brake pedal
2. Still not touching brake pedal, hit start button
3. Floor throttle pedal for a good 30 seconds (used my phone stopwatch, it's longer than you think)
4. Still not touching brake pedal, hit start button again
5. Wait 30 seconds, I waited longer actually
6. Start the car normally"

No idea if this works or not, but people noticed their car being more responsive afterward. The f15 is far newer, so beats me. I've never come across it in my coding research, but if anyone finds anything, let us know.

pdawg · 01-07-2015, 02:13 AM

Quote:

Originally Posted by igorsvrub

Still did not get what exactly can be done with panel, can somebody please post pictures with panel before and after coding?

you can turn on the X5 M50d logo below the tach. I turned it off as it didn't make much sense to me to have it displayed on a 35i

igorsvrub · 01-07-2015, 05:52 PM

Quote:

Originally Posted by CC23

I want to say many thanks for OPASHA's help with coding. He takes a lot of his time helping those who take a leap into the coding world.

Opasha

He helped me as well

igorsvrub · 01-07-2015, 05:57 PM

Quote:

Originally Posted by pdawg

you can turn on the X5 M50d logo below the tach. I turned it off as it didn't make much sense to me to have it displayed on a 35i

Ohhh, I see now.
I do not need it for sure

usumega · 01-07-2015, 11:51 PM

Hi Opasha.

I have the same problem as Charles521. I downloaded the full psdzdata v5.4.2
and when I open Esys (v3.26.1) the version showed is 5.0.1.

I put the pszdata folder extracted from the file in the folder c:\data as I read in the installation instructions, so may be the psdzdata I downloaded wasn´t v5.4.2.

Can you PM me the link for latest Esys and PSdZData?

Thanks.

opasha · 01-08-2015, 12:30 AM

Quote:

Originally Posted by usumega

Hi Opasha.

I have the same problem as Charles521. I downloaded the full psdzdata v5.4.2
and when I open Esys (v3.26.1) the version showed is 5.0.1.

I put the pszdata folder extracted from the file in the folder c:\data as I read in the installation instructions, so may be the psdzdata I downloaded wasn´t v5.4.2.

Can you PM me the link for latest Esys and PSdZData?

Thanks.

Did you rename the extracted folder to "psdzdata" and delete the previous folder before placing the new one there? Also, use 7zip to extract the software. It's the only tool that extracts .zip and .rar files better than anything without getting corrupted. I've PMed you the software anyway, but follow the steps above before downloading so you aren't wasting your time

.

shawnsheridan · 01-08-2015, 02:27 AM

Quote:

Originally Posted by usumega

Hi Opasha.

I have the same problem as Charles521. I downloaded the full psdzdata v5.4.2
and when I open Esys (v3.26.1) the version showed is 5.0.1.
...

PSdZData and PSdZ are not the same thing. When you click on E-Sys => Help => About E-Sys, it displays the PSdZ version used in the build of E-Sys, which is not the same as the PSdZData from ISTA/P used by E-Sys for coding.

If your Connection target is F025-14-11-502, then your using 54.2 PSdZData.

charles521 · 01-08-2015, 02:48 AM

Quote:

Originally Posted by opasha

Did you rename the extracted folder to "psdzdata" and delete the previous folder before placing the new one there? Also, use 7zip to extract the software. It's the only tool that extracts .zip and .rar files better than anything without getting corrupted. I've PMed you the software anyway, but follow the steps above before downloading so you aren't wasting your time

.

Hi Opasha,

I really do not know where I did wrong as well, my PSDZdata version is still 5.0.1. Would you please assist. thanks!

shawnsheridan · 01-08-2015, 02:50 AM

Quote:

Originally Posted by charles521

Hi Opasha,

I really do not know where I did wrong as well, my PSDZdata version is still 5.0.1. Would you please assist. thanks!

Read my post above.

Where are you seeing version "5.0.1" displayed?

charles521 · 01-08-2015, 02:51 AM

Quote:

Originally Posted by shawnsheridan

PSdZData and PSdZ are not the same thing. When you click on E-Sys => Help => About E-Sys, it displays the PSdZ version used in the build of E-Sys, which is not the same as the PSdZData from ISTA/P used by E-Sys for coding.

If you Connection target is F025-14-11-502, then your using 54.2 PSdZData.

understand now. Many thanks Shawn

shawnsheridan · 01-08-2015, 02:55 AM

Quote:

Originally Posted by charles521

understand now. Many thanks Shawn

pdawg · 01-08-2015, 10:43 AM

Can anyone confirm they have gotten the coasting option in eco-drive to display/work?

usumega · 01-08-2015, 11:23 AM

Quote:

Originally Posted by shawnsheridan

PSdZData and PSdZ are not the same thing. When you click on E-Sys => Help => About E-Sys, it displays the PSdZ version used in the build of E-Sys, which is not the same as the PSdZData from ISTA/P used by E-Sys for coding.

If your Connection target is F025-14-11-502, then your using 54.2 PSdZData.

Thanks Shawn and Opasha. My problem was that indicated by Shawn.

opasha · 01-08-2015, 11:28 AM

Quote:

Originally Posted by usumega

Thanks Shawn and Opasha. My problem was that indicated by Shawn.

You're very welcome. Glad Shawn helped you figure it out

.

code505 · 01-08-2015, 12:58 PM

Hi,I went to BMW service and they told me that there is important update and I agreed.

when I recived my car, all the coding I done was deleted, so I wanted to code it again.

BDC_BODY coding was good. but when I wanted to read HU_NBT, I got this error:

Transaktions-Report: Aktion: Codierdaten lesen

HU_NBT [63] [0J30266]
readCPS o.k.
cafd_00000ded-003_013_025 Fehler:
File for "cafd_00000ded-003_013_025" not found! [C012]

any help

opasha · 01-08-2015, 01:01 PM

Quote:

Originally Posted by code505@hotmail.com

Hi,I went to BMW service and they told me that there is important update and I agreed.

when I recived my car, all the coding I done was deleted, so I wanted to code it again.

BDC_BODY coding was good. but when I wanted to read HU_NBT, I got this error:

Transaktions-Report: Aktion: Codierdaten lesen

HU_NBT [63] [0J30266]
readCPS o.k.
cafd_00000ded-003_013_025 Fehler:
File for "cafd_00000ded-003_013_025" not found! [C012]

any help

PM shawnsheridan for the new HU_NBT cafd.

shawnsheridan · 01-08-2015, 01:02 PM

Quote:

Originally Posted by code505@hotmail.com

Hi,I went to BMW service and they told me that there is important update and I agreed.

when I recived my car, all the coding I done was deleted, so I wanted to code it again.

BDC_BODY coding was good. but when I wanted to read HU_NBT, I got this error:

Transaktions-Report: Aktion: Codierdaten lesen

HU_NBT [63] [0J30266]
readCPS o.k.
cafd_00000ded-003_013_025 Fehler:
File for "cafd_00000ded-003_013_025" not found! [C012]

any help

See my post here:

http://www.bimmerfest.com/forums/sho...2&postcount=12

code505 · 01-08-2015, 03:22 PM

thank you bros for your help, all worked fine.

only one code did not work for me, the tire pressure and temperature did not appeared for me. I've coded it twice with no success.

01-06-2015, 02:40 PM	#903
cpd1 Enlisted Member 27 Rep 39 Posts Drives: X5 Join Date: Jun 2012 Location: CT iTrader: (0)	Revisiting the Kombi display with X5 M50d. I didn't have any other option than BMW/MPM. Suspect i need a software update for the Kombi. What production date do you guys have so you could enable it? pit from sssmokie's thread I came across the below thread, and seemingly a Kombi flash update sorted it. Don't think I am brave enough to risk doing it myself so will get it done at the dealer next time the car is there. http://www.bimmerfest.com/forums/sho...ight=kombi+mpm
	Appreciate 1 Quote

01-06-2015, 08:22 PM	#904
igorsvrub Private First Class 28 Rep 193 Posts Drives: X5, 40d Join Date: Jan 2014 Location: Riga, Latvia iTrader: (0)	Still did not get what exactly can be done with panel, can somebody please post pictures with panel before and after coding?
	Appreciate 0 Quote

01-06-2015, 08:50 PM	#905
CC23 New Member 18 Rep 7 Posts Drives: BMW X5 x35d Join Date: Dec 2014 Location: Texas iTrader: (0)	THANKS!! I want to say many thanks for OPASHA's help with coding. He takes a lot of his time helping those who take a leap into the coding world.
	Appreciate 1 Quote

01-07-2015, 12:31 AM	#906
hyde Lieutenant Colonel 556 Rep 1,746 Posts Drives: 2024 X3m40i Join Date: Oct 2011 Location: New York iTrader: (0)	Hi opasha Does coding also reset the learned driving habits? Just curious.. When it resets on-board info, does it also reset acceleration/transmission training that it learned over driving period? __________________
	Appreciate 0 Quote

01-07-2015, 11:51 PM	#911
usumega New Member 9 Rep 24 Posts Drives: BMW F16 30d Join Date: Nov 2014 Location: Europe iTrader: (0)	psdzdata version Hi Opasha. I have the same problem as Charles521. I downloaded the full psdzdata v5.4.2 and when I open Esys (v3.26.1) the version showed is 5.0.1. I put the pszdata folder extracted from the file in the folder c:\data as I read in the installation instructions, so may be the psdzdata I downloaded wasn´t v5.4.2. Can you PM me the link for latest Esys and PSdZData? Thanks.
	Appreciate 0 Quote

		BMW X5 and X6 Forum (F15/F16) > BMW X5 (F15) and BMW X6 (F16) Forum > BMW X5 and X6 (F15/F16) Forum
BMW Coding Thread

01-08-2015, 10:43 AM	#918
pdawg Second Lieutenant 159 Rep 265 Posts Drives: 2015 X5 XDrive 35i Join Date: Sep 2013 Location: Hawaii iTrader: (0)	Can anyone confirm they have gotten the coasting option in eco-drive to display/work?
	Appreciate 0 Quote

01-08-2015, 12:58 PM	#921
code505 Enlisted Member 2 Rep 34 Posts Drives: BMW F15 XF 2014 Join Date: Oct 2014 Location: SA iTrader: (0)	Hi,I went to BMW service and they told me that there is important update and I agreed. when I recived my car, all the coding I done was deleted, so I wanted to code it again. BDC_BODY coding was good. but when I wanted to read HU_NBT, I got this error: Transaktions-Report: Aktion: Codierdaten lesen HU_NBT [63] [0J30266] readCPS o.k. cafd_00000ded-003_013_025 Fehler: File for "cafd_00000ded-003_013_025" not found! [C012] any help
	Appreciate 0 Quote

01-08-2015, 03:22 PM	#924
code505 Enlisted Member 2 Rep 34 Posts Drives: BMW F15 XF 2014 Join Date: Oct 2014 Location: SA iTrader: (0)	thank you bros for your help, all worked fine. only one code did not work for me, the tire pressure and temperature did not appeared for me. I've coded it twice with no success.
	Appreciate 0 Quote